User's Manual

12
lost or a malfunction
Take out the battery only when the player is stopped.
- If the corresponding file exceeds the recording capacity or there is not enough room for a
recording, the recording will not be available.
When the memory is FULL, a message "FULL" will display.
- Recording to MP3 or H/D domains is not available (Only playback is available in MP3).
● Bit rate Setting
To change the recording bit rate from 16kbps to 32kbps, switch the unit to voice mode (using
the mode button) and hold down the REMAIN/EQ button until you see the desired bit rate on
the LCD screen.
*When you see the desired bit rate, let go of the REMAIN/EQ button.