User's Manual

1. Press the TIMER Button twice and the reserved recording screen appears.

The minute needle clock indicator and setting channel should be flickering.

Press  to select the file number and then push PLAY.

Now the days of the week will flicker. Use  to select the desired day and press PLAY.

2. After selecting the day set the hour by using  and pushing PLAY (same as before) to

select the desired hour (do the same for minutes). After the minutes are set, the start time

will flicker but you will be setting the ending time now. Set the hour by using  and

pushing PLAY (same as before) to select the desired hour (do the same for minutes). When

you finish, you will see the main screen and your unit is ready to record on the selected

day(s) & time(s).

(It will seem like you are changing the start time when setting the ending time but trust us

you are setting the ending time)

A start and ending time setting requires 4 PLAY presses.

(Exp- 1 start hour + 1 start minute + 1 ending hour + 1 ending minute = 4 )

You may set up to 10 reserved recordings for all the sections in AM/FM/VOICE.

● AM Region Setting

You can change Voice Bank’s AM region setting from EUROPE (9) to USA (10) or USA (10)

to EUROPE (9).

1. In VOICE or MP3 mode, press and hold the MODE button.

2. Press and hold the A-B button for about 3 seconds. (With the mode button still held

down)

3. Let go of the A-B button and you should see Voice Bank display USA or EUROPE on the

LCD.

4. Let go of the MODE button and use the A-B button to change between USA (10) &

EUROPE (9).

5. Press PLAY to select the desired setting.

* If you take too long to confirm your selections, you have to start the procedure all over

again.

AM/FM SD card Reserved Recording

1. Make sure you are in tuned to the desired AM/FM station prior to setting a reserved

(future) recording. Push the A-B button on Voice Bank to switch to the SD/MMC card

and next press the TIMER Button twice and the reserved recording screen appears. The

minute needle clock indicator and setting channel should be flickering. Press FW or RW

to select the file number and then push PLAY. Now the days of the week will flicker. Use

FW or RW to select the desired day and press PLAY.

2. After selecting the day, set the hour by using FW or RW and pushing PLAY (same as

before) to select the desired hour (do the same for minutes). After the minutes are set,

the start time will flicker but you will be setting the ending time now. Set the hour by

using FW or RW and pushing PLAY (same as before) to select the desired hour (do the

same for minutes). When you finish, you will see the main screen and your unit is ready

to record on the selected day(s) & time(s). You may set up to 10 reserved recordings for

all the sections in AM/FM/VOICE.