User's Manual

Page 22 CC Witness
Display Screens and Functions
a. “AM Display” — This setting is used to improve
the AM radio reception by turning the display
screen “OFF”. If any button is pressed, the display
screen will turn “ON” for three seconds, then turn
“OFF” again.
b. “Backlight Time” — Use the slider bar to set the
amount of time that the display backlight is to re-
manually set lower than the “Default Volume” set-
ting, it will not change at power-up.
e. “Speaker On/Off” — This setting is used with
the (optional) cradle accessory only. When set to
“OFF”, the icon will display. When the
CC Witness is placed in the cradle, the speaker
will turn off. This setting is useful when listening
to the CC Witness using the cradleʼs headphone
jack, as the speaker is not automatically disabled
when the cradleʼs headphone jack is in use.
4. “Display Settings”
main “ON” between button presses. If set to “Con-
tinue”, the backlight will remain “ON”. Adjusting the
Backlight Time setting is useful for conserving bat-
tery power, as more power is used when the back-
light is “ON”.
c. “Contrast Control” — Use the slider bar to adjust
the contrast of the display. When set too low, the
display will not be as visible. The default setting of
“05” is usually best.
d. “ID3 Tag” — This setting is used to display added
information that may be attached to computer audio
files. When set to “ON” and an audio file with ID3
tags is selected, the title of the file may also contain
the Artist, Album, track time, and more. When set to
“OFF” only the title of the audio file will be dis-
played. Most ID3 tags can be viewed and edited
with a Windows computer by selecting the fileʼs
“Properties”, then selecting the “Summary” tab.
Note: When a long filename has been highlighted, it will
scroll after two seconds.
CCrane_Manual_Ver2.4_CC Witness:Manual_CC Witness 11/19/09 6:15 PM Page 22