User manual

2) POFF(Automatic Power Off)
This is a setup to power off automatically after passing a certain time (30minute,
1hour, 1 and half hour, 2hours or Off) by compulsion.
The function is applicable at any mode.(Stop, Play, Rec. or FM)
It is not necessary to revert the setup to Off after execution. Only one time is
applicable after setup and automatically it reverts to Off.
3) INFO(Memory Information)
Show up information about a current selected memory.
Total memory capacity(MEM) & Remain Free Space(REM)
It is possible to go to the next step by either or or .
4) SOFt(Firmware Version)
Show up the firmware version.
5) dEFt(Default)
Revert all set values to factory default values.
43
3) ERS (Erase)
Erase unnecessary file(s) to save memory storage.
ONE: A selected file is erased.
ALL: All files in the current folder are erased.
To avoid erasing undesired file(s) by mistake, before erasing, a file and folder
must be checked whether it is desired file or folder.
10. SYS(System)
1) SLEP(Sleep Timer)
This is a setup for saving battery power if there is no operation for a certain
time(OFF, 3, 5, 7, 10minutes)
The function is only applicable at
STOP mode.
It should be off if it is not necessary.
42