User manual

B-2. Restart the recording(Resume Recording)
2928
B-1. Restart the recording(Normal Recording)
ARS(Auto Recording System)
This is the feature to start recording automatically by recognizing sound and if
no sound, pause( or Stop) recording. According to sound or no sound, repeatedly
record and pause(or Stop).
With this feature, memory space, battery time can be saved by stopping or
pausing.
SECU(Security Recording)
While recording, LCD display & Red LED disappear, so that the others can
t
recognize it is recording. Additionally, it can save battery life as well.
Press in security recording. REC displayed.
Ask restarting the
recording in normal or
resume with RES on
the display when
pressing REC again.
RED LED blinking.
Ask restarting the
recording in normal or
resume with
RES on
the display when
pressing REC again.
RED LED blinking.
Restart the recording
immediately just after a
previous paused point by
pressing REC .
With , play a
previous recorded contents
in 30sec before the paused
point and after 30sec of
playback, restart recording
from the paused point(RED
LED On again).
Stop recording by
pressing .
Stop the recording by
pressing
.
Mic Sensitivity
It is applicable for the recording thru internal, external mic or telephone adaptor.
Automatically control recording level to average sound level by
detecting average sound level with ALC(Automatic Level Control)
technology. This is proper for the recoding in conference room or
meeting room, so that all recorded sound may be in similar level
despite of distance from original sound source.
Recording at original sound level.
This is proper for the recording in near area from the sound source.
High
Low
Resume Recording (Time Machine Recording)
When the recording restarts after pausing, first, replay a previous file for
30seconds and then record from the end of the paused point. This is good for
making sure what the content was in previous recoding.
Setup
M with long key => Move to RES by or => press => Move to
On by or “ and then select On by .
How to operate
A. Record and then Pause
Start Recording with
RED LED On by
pressing
REC/PAUSE .
Keep Recording.
RED LED is keeping On.
Press Pause .
Recorded time and RED
LED are blinking.