Owner's Manual

EN
DE
FR
ES
7
HANDLING & OPERATION
1. Push the CO
2
compartment lever 1
downward 1 (as shown in the figure).
Open the CO
2
compartment.
Warning: There may be a minor discharge
of gas when you take off the CO
2
compart-
ment cap.
In the next step, remove the CO
2
capsules
and the capsule adapter 2.
2. Insert three CO
2
capsules with the help of
the capsule adapter (as shown in the figure)
and tightly close the CO
2
compartment while
leaving the CO
2
compartment lever at its
downward angle. In the next step, push the
lever back to its original position; this will
cause the three CO
2
capsules to be pierced
all at the same time.
WARNING
ALWAYS LEAVE THE CO
2
COMPARTMENT LEVER AT ITS DOWNWARD ANGLE UNTIL
THE CAP HAS BEEN SCREWED ON TIGHTLY.
WARNING
ALWAYS AIM IN A SAFE DIRECTION.
INSERTING CO
2
CAPSULES
CAUTION
- ONLY USE 12 G CO
2
CAPSULES.
- FOR STORAGE, REMOVE GAS CAPSULES.
- THERE MAY BE A MINOR DISCHARGE OF GAS WHEN YOU REMOVE THE GAS
CAPSULES. MAKE SURE THAT YOUR HANDS DO NOT COME INTO CONTACT
WITH DISCHARGED CO
2
GAS. THIS MAY CAUSE FREEZING OF THE SKIN.
- DO NOT EXPOSE THE CO
2
CAPSULES TO EXCESSIVE HEAT AND DO NOT STORE IT
AT TEMPERATURES EXCEEDING 54°C.
- ALWAYS ADHERE TO THE WARNINGS AND SAFETY INSTRUCTIONS OF THE MA-
NUFACTURER ON THE GAS CAPSULE IN RESPECT TO HANDLING AND STORAGE
OF A CO
2
GAS CONTAINER.
2
1