Operation Manual

• Never leave a loaded airgun unattended.

• Use only the proper size and type of projectile as it is

marked on the airgun.

• Never reuse ammunition.

• Do not shoot at hard surfaces or at the surface of water.

The projectile may bounce o or ricochet and hit someone

or something you had not intended to hit.

• Do not shoot at fragile objects such as windows.

• Place the backstop in a location that will be safe should

the backstop fail.

• Your backstop should be checked for wear before and af-

ter each use. All backstops are subject to wear and will

eventually fail. Replace your backstop if the surface is

worn or damaged or if a ricochet occurs.

• Do not attempt to disassemble or tamper with your air-

gun. Unauthorized repairs or modifying the function of

your airgun in any way may be unsafe and will void your

warranty.

• Before you store or transport your airgun, make sure it is

unloaded and is uncocked.

• Always store your airgun in a secure location away from

unauthorized users and separate from ammunition.

• Only persons who are thoroughly familiar with the air-

gun’s function and proper use and who are allowed by

law should handle the airgun.

• Always wear safety shooting glasses when shooting or

performing maintenance on airguns.

• Only shoot where permitted by law.

CAUTION

THE COMPONENTS OF THIS AIRGUN WERE ENGINEERED

AND MANUFACTURED TO DELIVER OPTIMUM PERFOR-

MANCE. ANY MODIFICATION OR TAMPERING WITH AN

AIRGUN MAY CAUSE A MALFUNCTION, VOID YOUR WAR-

RANTY AND MAY MAKE IT UNSAFE TO USE. ANY CHANGE

IN PERFORMANCE (SUCH AS A LOWERED TRIGGER PULL

FORCE AND SHORTENED TRIGGER TRAVEL) INDICATES

POSSIBLE MODIFICATION, TAMPERING AND/OR WEAR.

SUCH AIRGUN SHOULD BE INSPECTED, REPLACED, OR

PROPERLY REPAIRED BY ONLY QUALIFIED PERSONNEL.

ANY AIRGUN THAT HAS BEEN DROPPED SHOULD BE

CHECKED BY QUALIFIED PERSONNEL TO ENSURE THAT

ITS FUNCTION HAS NOT BEEN AFFECTED.