Operating Instructions

Mode d'emploi

DIANA P1000

Handling

Trigger

(Continued)

Always make sure that the gun is unloaded and uncocked before

beginning any care. Never disassemble or repair the system.

Improper use or disassembly can cause injuries or damage the

gun. In the event of a functional disruption, the air gun should

be inspected by a specialized retailer and repaired if necessary,

or sent in to our company. Repairs must use only original DIANA

replacement parts. The cylinder must be empty, i.e. unpressurized,

when it is sent.

All steel parts should be carefully wiped off after use or after

longer periods of disuse, with a cloth soaked in gun oil and free

from lint, in order to preserve their appearance and function in

the long term and to protect the surface from rust. The parts

were lubricated in the factory during assembly. The barrel should

be cleaned using a wick or a felt stopper soaked in gun oil. We

strongly discourage using wire brushes because this can

damage the inside of the barrel.

Under extremely cold temperatures, bring the gun up to room

temperature first.

We provide a two-year guarantee for this air gun. This excludes

defects that are caused by improper handling, the use of force

or normal wear and tear.

Caring for the gun

Guarantee

Image 11