Operating Instructions

Image 5
27
26
Handling
Handling
Cocking the system
Safety
•
•
Image 4a
Image 4b
Image 6a
WARNING:
Always point the gun in a safe direction! Check
to make sure that no one is near the muzzle or in
front of the manometer.
Once the system has been cocked and the locking mechanism is
slid back, the loaded magazine can be inserted at a downward
diagonal until it stops (see Images 6a, 6b).
The front side of the magazine has a notch mark. When inserting
the magazine, make sure that this mark is at the edge of the
housing. When the mark returns to the starting position during
shooting, that means there are no more diabolos in the magazine
(see Image 6b).
Slide the locking mechanism forward again; you may need to
turn the magazine slightly (see Image 6c).
Now swing the cocking lever all the way forward to the starting
position. This pushes a diabolo pellet into the barrel (see Image
6d).
To shoot, slide the safety lock forward (see Image 6e and Image
5, p. 26).
If you do NOT wish to continue shooting after firing a shot,
unload the gun immediately (see “Unloading the gun,” p. 30).
Loading the gun (magazine)
•
•
•
•
•
•
Image 6e
Image 6c
Image 6d
GB
GB
Pull the locking device back (see Image 4a).
Pull the cocking lever out of the starting position and swing it
back until it stops (see Image 4b). After reaching the rear stopping
position, the trigger will lock in place and is automatically secured
(see Image 5).
• White and red dots both visible = safety is on
• Red dot is visible = ready to fire
Front side
Edge notch
Image 6b