Owner's Manual

EN
DE
FR
ES
13
The information provided in this Manual is subject to change without notice.
Please check our website www.diana-airguns.de for the latest downloadable version of
the Manual, and learn further interesting facts about DIANA and your model.
CAUTION
WARRANTY IS VOID IF THE AIRGUN IS DISMANTLED WITHOUT AUTHORIZATION. ALL
REPAIRS MUST BE MADE BY AUTHORIZED PERSONNEL.
CARE & MAINTENANCE
BARREL CLEANING
1. Engage the safety. Attach a piece of
cotton fabric to the end of a cleaning rod.
2. Clean the barrel with some gun oil. Insert
the rod as shown.
CAUTION
- DO NOT FORCE THE ROD INTO THE BARREL AS THIS COULD CAUSE DAMAGE.
- CLEAN THE METAL PARTS ON THE OUTSIDE OF THE AIRGUN USING A CLOTH WHICH
HAS BEEN SLIGHTLY DAMPENED WITH SOME GUN OIL.
- NEVER ALLOW GUN OIL TO DRIP DIRECTLY INTO THE BARREL.
WARNING
UNLOAD THE AIRGUN BEFORE CLEANING IT.
WARNING
IF A PELLET DOES NOT FIRE AFTER YOU HAVE COMPLETED THE OPERATION STEPS DE-
SCRIBED IN THIS MANUAL, THE AIRGUN MAY BE JAMMED. AN UNFIRED PROJECTILE
IN THE BARREL CAN PRESENT A DANGEROUS SITUATION. TO ELIMINATE THE JAM-
MING, KEEP THE MUZZLE OF THE AIRGUN POINTED IN A SAFE DIRECTION AND REPEAT
THE OPERATION STEPS, HOWEVER WITHOUT LOADING ANOTHER PELLET. IF A PROJEC-
TILE STILL DOES NOT FIRE, DO THE FOLLOWING:
1. ENGAGE THE SAFETY AND REMOVE THE MAGAZINE OR THE LOADING BASE.
2. CLEAR THE BARREL BY RUNNING A CLEANING ROD THROUGH IT FROM THE MUZZLE
END.
3. REPEAT THE OPERATION STEPS.