Owner's Manual

HANDLING & OPERATION
SIGHT ADJUSTMENT
SHOOTING
Elevation adjustment: If the point of impact is
too high: turn screw 1 clockwise. If the point
of impact is too low: turn screw 1 coun-
terclockwise.
Windage adjustment: Loosen screw 2. If the
point of impact is too far left: adjust rear sight
to A. If the point of impact is too far right:
adjust to B. Tighten screw 2.
2
1
AIMING
Put the safety “OFF“.
To begin shooting, aim at a safe target and pull
on the trigger 1.
Note: Push the bolt handle a little harder if
resistance is felt when closing the bolt back
with the magazine.
For further shooting, load and cock the
airgun again. Pull the bolt handle backward
2 until a click sound is heard and push it
forward and down 3. Make sure that only
one pellet is loaded into the barrel.
1
2 3
A
B