Owner's Manual
EN
7
4. Loading Your Air Rie
6. Aiming at a Safe Target
5. Closing the Barrel
OPERATION
Firmly grasp the barrel behind the front sight, return the barrel to its original
closed and latched position.
Always aim your air rie in a SAFE DIRECTION. Always choose your target
carefully. It is best to shoot at a paper bullseye target which is attached to a safe
backstop. A heavy blanket should be hung behind the target backstop to prevent
ricochet should you miss the backstop. Think about what you will hit if you miss
the target.
THE DIANA
®
N-TEC AIR RIFLE sights are correctly aimed when the front sight
post is positioned exactly in the notch of the rear sight. The top of the front sight
post should be even with the top of the notch in the rear sight. The bullseye
should appear to rest on the top of the front sight (illustration 6).
BE CAREFUL TO KEEP FINGERS CLEAR OF COCKING
MECHANISM (SEE “PINCH POINTS”, ILLUSTRATION 5).
GRASP THE BARREL FIRMLY AS YOU COCK IT AND CLOSE
IT TO PREVENT IT FROM SNAPPING BACK AND POSSIBLY
CAUSING INJURY.
CAUTION
PINCH
POINT
PINCH
POINT
Illustration 5
YOUR BACKSTOP SHOULD BE INSPECTED FOR WEAR BEFORE AND AFTER EACH USE.
DISCONTINUE USE IF THE BACKSTOP SURFACE SHOWS SIGNS OF FAILURE. ALWAYS
PLACE THE BACKSTOP IN A LOCATION THAT WILL BE SAFE SHOULD THE BACKSTOP FAIL.
DISCONTINUE THE USE OF A BACKSTOP IF THE PROJECTILE REBOUNDS OR RICOCHETS.
CAUTION
Illustration 6










