User`s manual

2. Place the monitor on its top on a soft surface, then use the arrow guides

to fit the swivel base onto the bottom of the display.

3. Place the monitor on its base and connect the power cord to the monitor,

then attach it to a power socket.

4. Connect the computer end of the D-SUB cable to the 15-pin output

connector on the video card of your computer.

5. Turn the monitor and the computer on.

If you wish to connect the monitor to an older-type Apple Macintosh

computer, you will need to use a Macintosh cable adaptor (sold separately).

The adaptor connects the video signal cable of your monitor to the video port

of the computer. Your computer dealer should be able to supply you with a

suitable adaptor.

Drivers for Windows 95, 98, 2000, XP and Millennium Edition

Windows will detect the Diamond Digital DV1772FD monitor the first time

you turn the computer on after installing it. The Add New Hardware wizard

will prompt for drivers. Install the standard Windows Plug & Play Monitor

driver. This driver will work correctly and allow you to use the monitor with its

optimal resolutions and refresh rates.