DIAMOND DIGITAL® DV1772FD / DV1772FDB Colour Monitor 17” (43 cm) CRT Size 16” (40.
Diamond Digital is a registered trademark of Mitsubishi Electric Australia Pty. Ltd. Microsoft and Windows are registered trademarks of Microsoft Corporation. Apple and Macintosh are registered trademarks of Apple Computer, Inc. All other trademarks remain the property of their respective owners.
Table of Contents 1 Important Safety Instructions .......................................... 1 2 Features ............................................................................. 2 3 Unpacking the Monitor ..................................................... 3 4 Installation ......................................................................... 4 Drivers for Windows 95, 98, 2000, XP and Millennium Edition...... 5 5 Adjusting the Monitor ......................................................
Copyright Notice Copyright 2005, Mitsubishi Electric Australia Pty. Ltd. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission. Disclaimer Mitsubishi Electric Australia Pty. Ltd.
1 Important Safety Instructions Please read the following safety instructions before installing or cleaning your Diamond Digital monitor: 1. This monitor must be operated from the type of power source indicated on the rating label. If you are not sure of the type of power available in your area, consult your dealer or local electricity supply company. 2. This monitor must be operated with a 3 wire electrical cable that has a plug with a third (grounding) pin.
2 Features Your Diamond Digital DV1772FD Monitor has the following features: ♦ Plug and Play Compatibility With DDC-2B™, the DV1772FD is compatible with the Plug and Play features of Microsoft® Windows® 95, 98, 2000, XP and Millennium Edition. ♦ Compatible with PC, Apple® Macintosh® and most other computer systems. ♦ Flicker-free Image The monitor supports VESA standard graphics signals with flicker-free refresh rates at resolutions up to 1024 x 768 pixels at 85Hz. ♦ Larger Viewable Size With its 40.
3 Unpacking the Monitor Please check that the following items are included with your monitor. If they are missing or damaged, please contact your place of purchase immediately. ♦ Monitor with attached signal cable ♦ Tilt/swivel base ♦ Power cord ♦ User’s manual Locate the model name and the serial number label on the back of your monitor and write the details of the monitor and your place of purchase in the space on page (ii) of this manual for future reference.
4 Installation Your monitor is equipped with an automatic power supply with a voltage range from 100 to 240 Volts AC at a frequency of 50 to 60 Hz. Install Remove Connecting Cables 1. Power Cord 2. Signal Cable To install your Diamond Digital DV1772FD monitor: 1. Make sure that the computer system’s power is turned off.
2. Place the monitor on its top on a soft surface, then use the arrow guides to fit the swivel base onto the bottom of the display. 3. Place the monitor on its base and connect the power cord to the monitor, then attach it to a power socket. 4. Connect the computer end of the D-SUB cable to the 15-pin output connector on the video card of your computer. 5. Turn the monitor and the computer on.
5 Adjusting the Monitor You can adjust the monitor using its On-Screen Display (OSD) menu system. There are 4 buttons that control the monitor: 1. Power To turn the monitor on and off 2. POWER INDICATOR 3. MENU Activates OSD function or function adjustment confirmation 4. /> Moves to another menu item or increases the selected parameter. Hotkey for contrast adjustment. 5. /< Moves to another menu item or decreases the selected parameter. Hotkey for brightness adjustment. 6.
Selecting Functions and Making Adjustments Contrast Hotkey 1. Press ‘>‘ to open the contrast adjustment display. 2. Press < or > to adjust the contrast level. 3. Press the MENU button to save your changes. Brightness Hotkey 1. Press ‘<‘ to open the brightness adjustment display. 2. Press < or > to adjust the brightness level. 3. Press the MENU button to save your changes.
The Main Menu The Diamond Digital DV1772FD’s controls are accessed by pressing the MENU button, to open the OSD (On-Screen-Display). The main menu will be displayed as follows. Making Adjustments V: 85Hz H: 68.
The description for functional control icons 1. CONTRAST : Adjust the picture contrast. 2. BRIGHTNESS : Adjust the picture brightness. 3. H-CENTER : Adjust the horizontal position of the picture. 4. H-SIZE : Adjust the picture’s horizontal size. 5. V-CENTER : Adjust the vertical position of the picture. 6. V-SIZE : Adjust the picture’s vertical size. 7. ZOOM : Adjust the picture’s horizontal and vertical size simultaneously. 8. PINCUSHION : Adjust the pincushion and barrel. 9.
13. 6500°K/9300°K (COLOR TEMPERATURE ) : The color temperature for 6500°K is x=0.313, y=0.329 and 9300°K is x=0.283, y=0.297. It presents two different color sets on the screen. You can select 9300°K or 6500°K by pressing MENU Key. : 14. USER COLOR ( Red / Blue ) If the 9300°K normal white or 6500°K warmer white do not satisfy your desire, properly adjust RGB GAIN controls to obtain your optimum whiteness level. 15.
Timing and Refresh Rate Setting By making adjustments of your video card settings, you can set the timing and the refresh rate of the graphics signal to match your requirements. Please consult your operating system’s and graphics adaptor’s documentation for details about how this may be done. The monitor will automatically save the changes that you make and use the new settings whenever you turn it on.
6 Troubleshooting If you encounter any trouble using the Diamond Digital DV1772FD monitor, make sure that your monitor is properly installed. (For hardware installation, see Chapter 4 of this manual.) If the problems persist, please check this chapter for possible solutions before calling Mitsubishi Electric or one of our Authorised Service Centres. No image is displayed - Check that the light (LED) next to the monitor’s power button is lit and is green in colour.
- Remove any magnetic objects that are near the monitor. These include speakers and power supplies (AC adaptors). Colours are impure. - Check that the cable is securely connected to the computer. - Check the VGA signal cable for damage. If any pins are bent or broken off, contact your dealer or an authorised Mitsubishi Electric service agent (see Chapter 8 for details). - Check the monitor’s colour settings. Press the OK button and select the Color Adjustments menu.
7 Specifications Model DV1772FD Display Characteristics Display Type 17” (43.2 cm) diagonal cathode ray tube Maximum Viewable Size 16” (40.6 cm) diagonal Dot pitch 0.25 mm (0.
User Interface Mains power switch, On-Screen Display with 4 control buttons Controls On-Screen Display Functions: Contrast; Brightness; Horizontal Position; Horizontal Size; Vertical Position; Vertical Size; Zoom; Pincushion, Balance, Trapezoid, Parallelogram, Rotate; 6500°K; User Colour; 9300°K; Degauss; Moire; Exit; OSD Language; Physical Characteristics Power Management VESA DPMS, Energy Star Maximum Power Consumption 75 Watts Consumption in Power Saving Modes < 2 Watts Operating Voltage Automa
8 Service Contacts If problems remain after checking this manual, please contact your place of purchase or contact Australian Service Contacts Visit the Mitsubishi Electric Australia web site at www.mitsubishielectric.com.
Victoria and Tasmania 4 / 303 Burwood Hwy East Burwood, Vic, 3151 Telephone: (03) 9262-9899 Fax: (03) 9262-9850 Western Australia 5 / 329 Collier Road Bassendean, WA, 6054 Telephone: (08) 9377-3411 Fax: (08) 9377-3499 17
