Owner`s manual

Assembly Notes

• Please read the entire Apex U6 Owner’s Manual before beginning the

assembly. Review the package contents to ensure all listed parts are

included.

• The assembler will require a 15 mm box wrench, a 6 mm hex wrench, a 15

mm pedal wrench, and a Phillips screwdriver for assembly. All required tools

are included.

• The estimated assembly time (of the Apex U6) for a person familiar with

basic tool usage is thirty (30) to forty-five (45) minutes.

• Always inspect the unit to ensure handlebars are fixed and the seat post is

locked into position prior to using the unit.

Assembly Instructions

Allen Bolt

M7 x 1.0 x 30 mm (1)

Lock Washer

ID 7.0 mm (2)

Pedal Wrench / Screwdriver (1)

Crank Bolt

& Nut Wrench /

Screwdriver

(1)

Hex Wrench (1)

Flat Washer

ID 7.0 mm (2)

Apex U6 Assembly Hardware Kit

DP #22-10-1030

Bushing

ID 7.0 x OD 12.0 (1)

T-Handle M7 x 65 mm (1)

Handlebar

Clamp

(1)

Remove the hex fixing bolts (B & D)

from the front stabilizer (A) and rear

stabilizer (C).

Align the holes in the main frame with

the recessed nuts in the stabilizers

and thread the fixing bolts into place

Level the base by adjusting the

leveling feet integrated into each of the

stabilizer end caps (AA). Rotate the

knobs counter-clockwise to raise the

feet and clockwise to lower them.

NOTE: Always check the stability

of the unit after it has been moved

as serious injury can result.