Diamondback Fitness DP #: 22-10-1028 • 6004 S. 190th Street, Suite 101 • Kent, WA 98032 • Ph: 800.776.
Apex U6 Owner’s Manual
PURCHASER’S REFERENCE INFORMATION Product Name Diamondback Fitness Apex U6 Upright Serial Number: E _ _ _ _ _ _ _ _ _ _ Record the serial number here. Serial Number Location The serial number will be located on the right side of the lower main frame, just forward of the rear stabilizer (see figure to the right).
Diamondback Fitness Apex U6 Owner’s Manual Release v.
TABLE OF CONTENTS PURCHASER’S REFERENCE INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Serial Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION Congratulations on the purchase of your new Diamondback Fitness Apex U6 Exercise Bicycle. You have made a smart choice and are about to enjoy one of the most effective and technically-advanced methods of cardiovascular exercise available today. Founded in 1991 as an off-shoot of the legendary bicycle company, Diamondback Fitness was in many ways a complimentary addition to the Diamondback brand.
Apex U6 Assembly Part 6 Description A . . . . . . Front Stabilizer [Quantity: 1] B . . . . . . Hex Bolt - M8 x 1.25 x 16 mm (6 mm socket) [2] C . . . . . . Rear Stabilizer [1] D . . . . . . Hex Bolt - M8 x 1.25 x 16 mm (6 mm socket) [2] E1 . . . . . . Pedal – Left [1] E2 . . . . . . Pedal – Right [1] F . . . . . . . Saddle [1] G . . . . . . Seat Post Assembly [1] H . . . . . . Lower Wire Harness Connector [1] J . . . . . . . Console Mast Assembly [1] K1 . . . . .
Assembly Instructions 1 Apex U6 Assembly Hardware Kit DP #22-10-1030 Allen Bolt M7 x 1.0 x 30 mm (1) B A Bushing ID 7.0 x OD 12.0 (1) Crank Bolt & Nut Wrench / Screwdriver (1) Flat Washer ID 7.0 mm (2) T-Handle D AA M7 x 65 mm (1) Hex Wrench (1) Lock Washer ID 7.0 mm (2) Pedal Wrench / Screwdriver (1) Handlebar Clamp (1) Assembly Notes • Please read the entire Apex U6 Owner’s Manual before beginning the assembly. Review the package contents to ensure all listed parts are included.
2 3 4 J F Z M E2 G Y L N H K1 BB Z E1 Remove the left and right crank caps (Z) by inserting a screwdriver into the cap opening and un-threading counter-clockwise. Tighten both crank nuts (clockwise) with the enclosed box wrench and replace the crank caps. Thread the left pedal (E1) into the left crank. Tighten firmly in a counterclockwise direction with the spanner wrench. Install the right pedal (E2) into the right crank, tightening in a clockwise direction. Reinstall the crank caps (Z).
5 U Q7 Q1Q2 T R W V P Q3 Q4 6 S Q5 Q6 CC Thread the heart rate wire harness connector (T) through the hole on the right side of the console mast and up through the opening at the top. 7 Move the unit into final position with the help of the front transport rollers. Carefully lift and support the rear end of the unit until both wheels touch the ground. Slowly roll into position. After moving the unit, ensure all four feet touch the floor. Review assembly step #1 above for leveling instructions.
SAFETY INSTRUCTIONS & WARNINGS Every piece of Diamondback Fitness equipment is built for maximum safety and meets or exceeds all applicable domestic and international standards. However, certain precautions need to be taken when operating any piece of fitness equipment. NOTE: Please read the entire owner’s manual before operating the unit. NOTE: Read all warnings posted on the unit. If the warning label to the right is missing from the Apex U6 Upright Cycle, contact Diamondback Fitness at (800) 776.
• Place the unit in an area that will meet minimum the clearance requirements: Front, Back & Sides = 2 feet. • This unit is heavy. Use caution when moving. Tilt the unit forward until the integrated transport rollers on the front stabilizer make contact with the ground and slowly push or pull into the desired position. Always unplug the unit from the outlet before moving or servicing. • Keep the unit away from walls to allow proper ventilation. Air should be able to circulate freely around the unit.
WORKOUT GUIDELINES Good Health is an Exercise in Common Sense In the study titled, “The Surgeon General’s Call To Action To Prevent and Decrease Overweight and Obesity,” the surgeon general indicates that 61% of American adults are either overweight or obese. The study indicates that being overweight increases the risk of health problems, such as heart disease, certain types of cancer, as well as Type-2 diabetes among other afflictions.
Heart Rate is an Important Key to Your Exercise The Surgeon General also released a report on physical activity and health. This report dictates that exercise and fitness are beneficial for a person’s health and reiterated the need for exercise as a key component for disease prevention and healthier living. The best way to determine exercise intensity is to monitor your pulse during exercise. Heart rate can easily be determined by counting the pulse rate at the chest, wrist or carotid artery on your neck.
In general, a wireless heart rate chest strap is a more accurate method of detecting one’s heart rate. The user is not required to grip the touch heart rate sensors and offers more flexibility as the unit will continuously display the user’s heart rate no matter where the hands are placed.
Workout QUALITY AND QUANTITY It is recommended that you accumulate at least 30 minutes of physical activity most days of the week. Physical activity should be initiated slowly and the intensity should be increased gradually. You should select activities that you enjoy and can fit into your daily life. Having Diamondback Fitness equipment at home offers you the opportunity to work out without going to the gym.
• After an aerobic workout of roughly 20-30 minutes, spend 10 minutes gradually reducing your heart rate with a lower resistance level. NOTE: Start slow, with intensity low until you build up endurance and strength. Always consult your physician before beginning any exercise program.
CONSOLE LAYOUT NOTE: It is advised that new users read this entire section prior to beginning their first workout session. LCD Display Windows Time Tracks the time of the current workout program. Heart Symbol Indicates that a heart rate is detected by either the touch heart rate sensors, or the wireless heart rate receiver.
RPM An acronym for Revolutions-Per-Minute, the number of complete revolutions a single pedal makes every 60 seconds. The display for RPM will alternate with SPEED every five (5) seconds. Load Displays the current resistance level applied to the workout. The maximum resistance load is 16. Distance The estimated total distance (in miles) traveled since the beginning of the workout. Calories The estimated number of calories burned since the beginning of the workout will be displayed in this field.
Buttons and Keys RESET The reset button will return the programming to the program selection menu. Holding the RESET key down for two seconds restarts the system and enters the User Set-Up mode. START / QUICK START / STOP When powering up the unit, it is possible to bypass all data entry and enter the Quick Start program. Pressing START / QUICK START / STOP while in the Program Set-Up mode will immediately launch the program displayed in the Alpha-Numeric Messaging Bar.
FITNESS TEST At the end of a program, pressing the FITNESS TEST button once will launch the Fitness Test program. Based upon the rate at which the user’s heart rate decreases over a sixty (60) second period, the Fitness Test program provides a basic analysis of the user’s fitness by displaying F1, F2, F3, F4 F5 or F6 where F1 represent the highest level of fitness.
PROGRAMS – Get Ready to Work Out When the Apex U6 is plugged into an electrical outlet, an audible beep will sound, confirming power has reached the console. All segments of the display will light up for two seconds. “USER” will flash in the Alpha-Numeric Message Bar. Quick Start The Quick Start program offers users the ability to bypass all data entry in the User Select/User Set-Up modes and simply begin a Manual workout program by pressing the START / QUICK START / STOP key once.
• Pressing the ENTER key will launch the Program Select mode. • Load / resistance may be adjusted via the UP or DOWN keys. • To end the program, press START / QUICK START / STOP or simply stop pedaling. Program Select Mode The Program Select mode allows the user to choose their desired program and customize the data and information required to operate these programs. To enter the Program Select mode: • From the User Select or User Set-Up modes, press the START key twice, followed by the RESET key.
NOTE: When the user is prompted for a Time entry, a value of zero (0:00) will set the clock to count up from zero (00:00). When another value is entered, the clock will count down when the program is launched. • “Distance” will now be flashing. Adjust the value and press ENTER to accept. • “Calories” will flash. Adjust and press ENTER. • “Pulse” will be flashing. Press ENTER once the desired value has been selected.
up or down using the UP and DOWN keys. The load will be displayed in the lower left corner of the console. Press ENTER to advance to the next column. Make any desired adjustments to the resistance and repeat the process for all twenty (20) columns. Once all profile adjustments are complete, press and hold the ENTER key for one (1) second to accept the updates. • “Time” will flash. Adjust the value and press START / QUICK START / STOP to launch the program.
(User 1, User 2, User 3 or User 4) and update any inaccurate values. See the section “User Select Mode and User Set-Up Mode” above for more information. A user may bypass the User Set Up mode and run an effective heart rate control program by selecting the Fixed Target program option, and entering a heart rate value in Bpm/Beats-per-minute. • When Target HR is selected from the Program Selection mode, the Alpha-Numeric Messaging Bar will flash “Target 55.
MAINTENANCE All Diamondback Fitness products are engineered for years of near-silent operation. Let noise be your first indication that a repair or adjustment is required. Please, discontinue use immediately and contact an Authorized Service Technician or Diamondback Fitness Dealer if an unusual noise, scraping, knocking, grinding or vibration is detected. Often, a minor issue will become a major repair if ignored and use is continued. Store the unit in a cool and dry environment.
WARRANTY INFORMATION Diamondback Fitness warrants your Apex U6 to be free from defects in material and workmanship under normal use in the home environment. Diamondback Fitness’s obligation under this warranty is limited to the repair or replacement of any defective part, provided free of charge through an Authorized Service Agent. This warranty is extended to the original purchaser.
What is Covered – For Interior Residential Use Only. • Frame Limited lifetime warranty, covers defects in welds, materials, and workmanship (some exclusions apply). • Brake Limited lifetime warranty • Parts & Electronics 1 year • Labor 1 year • Wear Items 90 days Note: Limited lifetime refers to warranty coverage of the unit’s expected service life, not the lifetime of the purchaser.
Other Exclusions The warranty is void if the Apex U6 is placed in commercial or light commercial environments such as health clubs, schools, hotels, condominium common areas, correctional facilities, or any other non-residential setting. The warranty will not be honored if the Apex U6 is employed for commercial or rental purposes. The Apex U6 is for indoor use only.
WARRANTY REGISTRATION CARD Please return the completed warranty registration card to Diamondback Fitness within 15 days of purchase. Failure to comply may void the warranty. You may register your product at www.diamondbackfitness.com.
Get it fixed at your home or ours! FULL ONE (1) YEAR WARRANTY Your Home Diamondback Fitness stands behind every product we sell. If this For repair—in your home—of all major brand appliances, lawn and garden equipment, of heating and cooling systems, no matter who made it, no matter who sold it! Apex exercise bike fails due to a defect in material or workmanship For the replacement parts, accessories, and user’s manuals that you need to do-it-yourself.
