User`s guide

14
4
REMOVING YOUR DIAMOND
PRODUCT
This section describes how to properly remove your Viper software and
hardware from your system should you need to do so.
REMOVING VIPER V770 UNDER WINDOWS 98/95
1. From the Start menu, go to Start > Settings> Control Panel, then
double-click on Display. The Display Properties sheet appears.
2. Click on the Settings tab, then press the Advanced Properties button.
3. Click on the Adapter tab, the press the Change button. The Select
Device window appears.
4. Click on the Show All Devices bullet. Under Manufacturers select
Standard Display Types. Under Models, select Standard Display
Adapter (VGA).
5. Click on Apply, then click on OK in all windows to close and accept the
changes.
To remove the hardware:
1. Shut down your computer.
2. Remove the computer case as outlined in the hardware installation
instructions in Chapter 2.
3. Ground yourself by touching the power supply box.
To remove the hardware, simply reverse the hardware installation procedures
from Chapter 3.
REMOVING VIPER V770 UNDER WINDOWS NT 4.0
1. Select Start > Settings > Control Panel > Add/Remove Programs.
2. Click on the Remove the Product button.
3. Click Next.
4. When the uninstall is complete, Windows NT will automatically reboot.