Specifications

. . . . .
WALL PROCESSING
Adjusting Wall Position
CXPS Manual Edition 1.08 Operation 93
• <output #> ... <output #> are the channel numbers other than <first
output#> that are used in the wall. They should be listed in order from left to right,
top to bottom.
For example, to create the 4x4 wall shown in Figure 23 and route input 13 to it, you would
issue the command:
WALL 13 1 4 4 2 3 4 5 6 7 8 29 30 31 32 33 34 35 36 ON
Disabling Wall Processing Function
To turn wall processing function off, issue the command:
WALL <first output #> OFF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADJUSTING WALL POSITION
To interactively adjust the position of the wall, issue the command:
WALLADJ <first output #>
FIGURE 23. 4x4 Wall