Specifications

. . . . .
DISSOLVE AND FORCE EFFECTS
Dissolve and Force
CXPS Manual Edition 1.08 Operation 87
Choosing a dissolve rate of 1 will create a quick video “cut” transition, rather than a
more gradual video dissolve transition.
EXAMPLE
After setting up picture-in-picture mode in the previous example, and choosing
the dissolve rate of 120, the command is:
SDO 1 120 1 3 5 6
This sets preset 1 to trigger output 1 to dissolve into output 3, and output 5 to
dissolve into output 6 at a rate of 120.
STEP 3. DISSOLVE
To perform the simultaneous dissolve effect, issue the command:
SDORUN <preset #>
EXAMPLE
According to the setup of the previous two steps’ examples, the command is:
SDORUN 1
TO DELETE SIMULTANEOUS DISSOLVE SETTINGS
To remove a particular preset number’s simultaneous dissolve settings, issue the command:
SDODEL <preset #>