Specifications

DISSOLVE AND FORCE EFFECTS
Output Timing Synchronization
78 Operation Edition 1.08 CXPS Manual
cards. For example, you may dissolve from channels 1 to any other channel on card A, and
at the same time, dissolve from output 9 to any other channel on card C.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OUTPUT TIMING SYNCHRONIZATION
Before the dissolve or force functions are set up, the timing of each output channel that will
be involved in the effect must be synchronized to the first output channel on that card. This
includes the channel connected to the display, and also the channel you will be dissolving to
or from.
This means that you will have to synchronize only one card when setting up a standard
dissolve or force effect, or a simultaneous dissolve between channels that share the same
card. However, if you plan to simultaneously dissolve between channels on different cards,
FIGURE 20. CXPS Dissolve Capabilities
NOTE:
Output timing synchronization must be performed manually when using
RS-232/Telnet control.