Specifications

. . . . .
VIDEO WINDOWING
Window Position and Size
CXPS Manual Edition 1.08 Operation 67
WINDOW TRIVIEW FORMATION
The TriView command can be used to arrange a maximum of three windows. This
command arranges them into triview formation according to the priorities assigned to them
when window function was enabled.
In triview, the window assigned priority 1 will appear on the left half of the screen. The
windows assigned priorities 2 and 3 will appear on the right half of the display screen, with
the window holding priority 2 appearing on top of the window with priority 3. An example
of triview formation can be seen in Figure 17. The lightly-colored areas represent the
portions of the windows that might extend past the display screen when using a single-link
scaler card.
To arrange windows in triview formation, issue the command:
TV <display output #>
Where:
• <display output #> is the number of the output displaying the windows.
Switching in TriView Formation
NOTE:
Using a dual-link scaler card will allow windows to be sized down to
approximately the size of a postage stamp. When in triview formation, it
is necessary for some windows to extend past the boundaries of the
screen ONLY when using a single-link scaler card.
FIGURE 17. An output display containing windows in triview formation