Specifications

VIDEO SCALING
Advanced Video Scaling Operations
54 Operation Edition 1.08 CXPS Manual
Genlock
Genlocking video signals is used when you want to synchronize the output timing to the
input timing exactly. The image is passed through to the output without any scaling or
timing shift.
The command is:
GL <output #> <ON|OFF>
EXAMPLE
To genlock the output timing of Output 7 to the input source timing, issue the command:
GL 7 ON.
Programmable Look-Up Tables
The table below shows the four look-up table commands you can employ to customize your
output’s color settings.
WBLUT WBLUT <output #> <value> Changes the output gain for blue channel.
<value> is a value from 0-200.
Default = 100.
WGLUT WGLUT <output #> <value> Changes the output gain for green channel.
<value> is a value from 0-200.
Default = 100.
WLUT WLUT <output #> <value> Changes the output gain for all three color
channels: red, green, and blue.
<value> is a value from 0-200.
Default = 100.
WRLUT WRLUT <output #> <value> Changes the output gain for red channel.
<value> is a value from 0-200.
Default = 100.