Specifications

MATRIX SWITCHING
Matrix-Switching Control: RS-232 and Telnet
46 Operation Edition 1.08 CXPS Manual
To simultaneously switch outputs using the preset input-output pairs, issue the command:
SSORUN <preset#>
This will switch each input to display on its paired output, as specified by the pairs you
selected in the previous step.
USB Switching
USB switching is an optional CXPS feature. USB switching may be performed using the
three USB commands below.
USB COMMAND
Change USB switching mode by issuing the command:
USB <mode>
Where <mode> is either “lock” or “free.”
• When in lock mode, USB switching assignments will follow the video switch
assignments. For example, if you issue the video switch command SW 1 2 to route
input 1 to output 2, this would also switch USB 1 to 2.
• When in free mode, USB switching assignments will not follow video switching
assignments, and the user must issue the USBSW command to perform USB switching,
as described below.
USB SWITCH COMMAND
The USB Switch command controls USB switching when under free mode. Use the
command:
USBSW <usb input #> <usb output #>
USB STATUS COMMAND
The USB Status command displays the USB Input/Output connections and also the USB
mode selected.
To view USB status, issue the command: USBSTAT