Specifications

. . . . .
MATRIX SWITCHING
Matrix-Switching Control: RS-232 and Telnet
CXPS Manual Edition 1.08 Operation 45
EXAMPLE
Referring to Figure 11, the OSTAT command would be used as follows:
Simultaneous Switching Outputs
Using RS-232/Telnet Simultaneous Switching Outputs commands, you can change multiple
input-output assignments simultaneously using preset input-output pairs.
The steps required to perform simultaneous matrix switching are listed below.
1. SET INPUT-OUTPUT PAIRS
The Simultaneous Switching Outputs (SSO) command allows the user to store input-output
pairs in ten different preset slots. The maximum number of I/O pairs is equal to the
maximum channels installed.
To store input-output pairs to a preset slot (numbered 1-10), issue the command:
SSO <preset#> <input> <output> <input> <output> .... <input>
<output>
Where:
• <input> <output> represents an input-output pair.
• <preset #> refers to the preset slot (1-10) to which you would like to store these
switching pairs.
To delete the preset input-output assignments, issue the command:
SSODEL <preset#>
This will erase the I/O pair assignments you had saved to that preset slot.
2. SIMULTANEOUSLY SWITCH OUTPUTS
Once you have assigned input-output pairs to a preset slot number (1-10), you may
simultaneously switch all inputs to display on their specified output.
Command Action
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OSTAT 1 Checks the input channel routed to Output 1. Returns
input: 3.