Specifications

MATRIX SWITCHING
Matrix-Switching Control: RS-232 and Telnet
44 Operation Edition 1.08 CXPS Manual
EXAMPLE
In Figure 11, the switch command is used to route a DVI video source connected to Input 3
to three different output channels. If all three commands are issued in succession, the result
is that Input 3 would appear on all three output devices.
Output Status Command
The OSTAT command is used to determine which input is set to display on particular
output. The command is:
OSTAT <output #>
Command Action
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SW 3 1 Example A—routes Input 3 to Output 1
SW 3 2 Example B—routes Input 3 to Output 2
SW 3 5 Example C—routes Input 3 to Output 5
FIGURE 11. Matrix Switching Example