Specifications

MATRIX SWITCHING
Matrix Switching Control: GUI
42 Operation Edition 1.08 CXPS Manual
The dark gray input and output buttons on the GUI represent the inputs and outputs of the
connected CXPS. The GUI for a fully configured CXPS will have 36 input buttons and 36
output buttons.
To switch an input to an output
1 In the Matrix page of the GUI, click on a numbered input button to select the input you
want to switch.
The button will flash green, indicating that it has been selected. You now have 5 seconds to
route it to an output destination.
2 Click the Output button for the output to which you want to route the selected input.
3 The selected input is now routed to the output channel you have just chosen.
Both input and output buttons will be illuminated green to indicate their connection.
EXAMPLE ONE
To route Input 1 to display at Output 6, you first select the Input 1 button, and then promptly
select the Output 6 button. This will route Input 1 to Output 6.
FIGURE 10. Matrix-Switching Section of the GUI Web Controller