Specifications

CXPS Manual Edition 1.08 Operation 41
. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M ATRIX S WITCHING 7
This chapter describes the matrix switching capabilities of the CXPS.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ABOUT MATRIX SWITCHING
The CXPS provides 36 x 36 DVI matrix switching and is controlled with the web-server
GUI or by using RS-232 or Telnet commands. Any connected input’s channel can be
switched to any output channel.
For information about setting up remote control of your device, see “Step 4: Establish
Permanent Remote Control” on page 28.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MATRIX SWITCHING CONTROL: GUI
The GUI I/O buttons found on the Matrix page of the GUI let you quickly and easily set up
and modify input-output assignments. Figure 10 shows an example of the CXPS GUI being
used to control matrix switching assignments.