Specifications

INSTALLATION INSTRUCTIONS
Final System Installation
26 Installation Edition 1.08 CXPS Manual
1 Connect any dual-link DVI signals to DVI input connectors on cards in odd-numbered
input slots only.
The DVI input cards in the odd-numbered slots (that is, slots 1, 3, 5, 7, and 9) can accept dual-
link DVI inputs. See “Dual-Link vs Single-Link” on page 12 for more information about dual-
link DVI considerations.
2 Connect any single-link DVI or fiber signals to input connectors on any card.
All DVI and fiber input channels can accept single-link inputs.
3 Apply DVI converters to any non-DVI signals and connect to input connectors on any
CXPS DVI input card.
Step 3: Connect CXPS Outputs to All Displays
WHAT YOU WILL NEED FOR THIS STEP
• All DVI or fiber-capable display devices you want to use in your installation
• DVI or fiber cable
• (Optional) DVI signal conditioners. If the distance to the display requires more than
seven meters of DVI cable, a Black Diamond Video DVI X-treme Cable Kit should be
used with the DVI X-treme II Conditioner and appropriate length of cable provided in
the DVI cable kit.