Specifications

. . . . .
INSTALLATION INSTRUCTIONS
Final System Installation
CXPS Manual Edition 1.08 Installation 25
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FINAL SYSTEM INSTALLATION
Once you have completed a thorough test of your CXPS equipment you are ready to do the
final system installation. The final system installation consists of the following series of
steps:
Step 1: AC Power Connection
WHAT YOU WILL NEED FOR THIS STEP
• Power cord (supplied)
• Surge protector (recommended)
• Line conditioner (recommended)
DESCRIPTION
Begin your final system installation by connecting the CXPS to an AC power supply and
powering it up.
1 Connect the power cord (supplied) to the AC input on the CXPS.
2 Plug the power cord into a surge protector (recommended).
3 Plug the surge protector into a conditioned AC power source.
4 Turn on the CXPS using the power switch on the rear panel.
The status button on the front panel turns blue or green when the CXPS CPU is initialized and
ready.
Step 2: Connect All DVI and Fiber Inputs
WHAT YOU WILL NEED FOR THIS STEP
• All DVI and fiber video input sources you want to display through the CXPS
• All non-DVI video sources you want to display through the CXPS
• DVI converters for the non-DVI, non-fiber video sources
• DVI cable
• Fiber cable
DESCRIPTION
Connect all DVI and fiber sources directly to the CXPS input channels. All non-DVI, non-
fiber sources must first be converted to a DVI signal before they connecting them to the
CXPS. See Figure 7, “System Installation Overview Diagram,” on page 27 for an
illustration of a typical CXPS system diagram.