Specifications

CXPS Manual Edition 1.08 Installation 21
. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I NSTALLATION I NSTRUCTIONS 5
This chapter tells you how to install your CXPS system. You should read Chapter 4
“Getting Ready to Install” first to familiarize yourself with the installation process.
The installation of your CXPS should be conducted in two phases:
System Test Installation. Begin your installation process by performing a complete system test installation. The
purpose of this phase is to establish remote control of the CXPS, and verify that all inputs
and outputs are working. You will use a single test video input and one of the display
devices you plan to use in your final system installation. You will verify that your test video
input is properly displayed on the display device when routed through each of the input and
output channels.
Final System Installation. Complete the installation process by doing the final system installation. In this phase, you
will install the CXPS in its final location. You will connect all necessary input and output
cabling, apply all input sources (including any DVI converters as necessary), connect all
display devices, and establish permanent remote control.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SYSTEM TEST INSTALLATION
Complete a thorough test of your CXPS equipment before doing the final system
installation. The system test installation consists of the following series of steps:
Step 1: AC Power Connection and System Power Up
WHAT YOU WILL NEED FOR THIS STEP
• Power cord (supplied)
• Surge protector (recommended)
• Line conditioner (recommended)
DESCRIPTION
Begin your system test installation by connecting the CXPS to an AC power supply and
powering it up.
1 Connect the power cord (supplied) to the AC input on the CXPS.
2 Plug the power cord into a surge protector (recommended).
3 Plug the surge protector into a conditioned AC power source.