Specifications

RS-232 AND 10/100T PROTOCOL
Using an External Controller
116 Reference Edition 1.08 CXPS Manual
Where:
• <window #> is the number of the output channel connected to the window you want
to control.
• <action> represents the type of pan or zoom.
Remember: zooming in or out of a window using the ZOOM command will adjust the
window’s size.
• <speed> is a value from 1 - 10 and sets the speed of the action.
Continuous Window Position & Zoom
This type of window position and zoom command is meant for use with a programmable
external control device.The continuous window position and zoom controls let you continue
an action until the STOP command is issued.
The command is:
WINPOS <window #> <zi | zo | ml | mr | mu | md | stop> <speed>
Where:
• zi = zoom in
• zo = zoom out
• ml = move window left
• mr = move window right
• mu = move window up
• md = move window down
• <speed> is a value from 1 - 10 and sets the speed of the action.
Action Description
. . . . . . . .
. . . . . . . . . . . . . . .
ZI Zoom in (sizes window up)
ZO Zoom out (sizes window
down)
PL Pan left
PR Pan right
PU Pan up
PD Pan down
STOP Stop action