Specifications

. . . . .
RS-232 AND 10/100T PROTOCOL
Using an External Controller
CXPS Manual Edition 1.08 Reference 115
Continuous Pan & Zoom
CONTINUOUS PANNING AND ZOOMING AN OUTPUT
DISPLAY
This type of pan and zoom is meant for use with a programmable external control device.
The continuous pan and zoom controls let you continue an action until the STOP command
is issued.
The command is:
ZOOM <output #> <action> <speed>
Where:
• <output #> is the number of the output channel connected to the output display or
window you want to control.
• <action> represents the type of pan or zoom:
• <speed> is a value from 1 - 10 and sets the speed of the action.
CONTINUOUS PANNING AND ZOOMING A WINDOW
This type of command is meant for use with a programmable external control device. The
continuous pan and size controls let you continue an action until the STOP command is
issued.
NOTE: Using the ZOOM command to zoom in or out will adjust the window’s size. To
zoom in or out within a window, use the continuous WINPOS command described in the
section “Continuous Window Position & Zoom” on page 116. Once the window is large
enough to completely fill the display screen, the pan controls may be used to pan within the
window.
The command is:
ZOOM <window #> <action> <speed>
Action Description
. . . . . . . .
. . . . . . . . . . . . . . .
ZI Zoom in
ZO Zoom out
PL Pan left
PR Pan right
PU Pan up
PD Pan down
STOP Stop action