Specifications

PRODUCT INFORMATION
Rear Panel Detail
6 Introduction Edition 1.08 CXPS Manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REAR PANEL DETAIL
Figure 3 details a fully-equipped CXPS. Your device may be configured with fewer
connections.
1 - AC POWER IN
AC input power connection (120/240 VAC).
2 - POWER SWITCH ON/OFF
The power switch is used to turn the unit on or off. The system status light on the front panel
indicates when the unit is powered on.
3 - DVI-I INPUT CONNECTIONS
The DVI-I input connectors are used to connect a video source to the CXPS. If the input
source is a DVI source, it can be connected directly to the device. If the input source is an
analog or SDI source, the signal must first be converted to DVI using a Black Diamond
Video DVI converter before connecting it to the CXPS.
FIGURE 3. CXPS Rear Panel Diagram
(3)
(4)
(8)
(7)
(6)
(5)
(1) (2)
(9)
(10)