Specifications

. . . . .
RS-232 AND 10/100T PROTOCOL
CXPS Command Set
CXPS Manual Edition 1.08 Reference 111
MAGFACTOR MAGFACTOR <output #>
<factor>
Adjusts the magnification factor. By default,
<factor> is 2, but can be any number 1-4.
MAGOFF MAGOFF <output #. Turns off the magnifying lens feature.
MAGON MAGON <output #> <fg> <bg> Turns on the magnifying lens.
PAN PAN <window #> Activates controls to pan around the active
boundary of zoomed video of the selected window.
Control pan action with:
i - up, m - down, j - left, l - right q - quit
PIPON PIPON <display output #>
<foreground> <background>
Turns on picture-in-picture windowing mode.
<foreground> is the output that will be displayed
as a window in the center of the foreground, and
<background> is the output that will be displayed
in the background, behind this window.
PIPOFF PIPOFF <display output #>
Turns off picture-in-picture mode.
<display output #> is the channel number
of the output displaying the windows.
RSTCLONE RSTCLONE <output #> Resets the clone on the specified output channel.
The output will return to the regular switching
mode.
TRIBOTTOM2 TB2 <output #> Arranges a maximum of 3 windows (with
priorities 1, 2, and 3) into TB2 formation
according to the priorities assigned to them when
window function was enabled. Arranges the first
window on the top half of the output and the other
2 windows at the bottom half of the output.
TRIVIEW TV <display output #> Arranges a maximum of 3 windows (with
priorities 1, 2, and 3) into triview formation
according to the priorities assigned to them when
window function was enabled.
<display output #> is the channel number
of the output displaying the windows.
QUADBOTTOM3 QB3 <output #> Arranges up to 4 windows in QB3 formation: the
first window appears on the upper half of the
specified output and the other 3 appear at the
bottom half of the output.
QUADMAP1 QM1 <quad1> <quad2> <quad3>
<quad4>
Special command. <quad 1> - <quad 4> are the
outputs feeding to those quadrants. The quadrants
are numbered from left to right, top to bottom.
Quadrants 1 and 3 will be filled with one input
source, and the other 2 will each be filled with
different input sources.
WINDOWING COMMANDS
(For firmware version 5.62 and above)
Command Syntax Action
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .