Specifications

RS-232 AND 10/100T PROTOCOL
CXPS Command Set
110 Reference Edition 1.08 CXPS Manual
WINDOWING COMMANDS
(For firmware version 5.62 and above)
Command Syntax Action
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
BORDER BORDER <output #> Returns the state of the border and the width.
BORDERCOLOR BORDERCOLOR <red> <green>
<blue>
Returns the value of red, green, and blue for the
border.
BORDEROFF BORDEROFF <output #> Turns off the border of the magnifying lens.
BORDERON BORDERON <output #> <width> Turns on the border if the
magnifying lens. <width> is the
number of pixels across the lens.
BORDERWIDTH BORDERWIDTH <output #>
<width>
Allows the user to change the width of the border.
CASCADE CC <display output #> Causes windows to become equally sized and
positioned in an overlapping arrangement that s
diagonally across the display. The windows are
organized in ascending order by priority.
<display output #> is the number of the
output displaying the windows.
CIWS CIWS <output #> Special command. Saves source window and
destination window values into NVRAM.
CLEAREFFECT CLREFFECT Clears all effects in memory, including SSO, SDO,
WINDOW, WALL, and DISSOLVE.
CLONE CLONE <window #> <output #>
The specified output mirrors the window output.
Control remains at the window output.
NOTE: The window and output must be in the
same slot.
CROP CROP <window #>
Interactively crop of the window. Cropping will
replace the removed section with background.
CROP <window #> <left>
<top> <right> <bottom>
<cropmode>
With multiple arguments, the window is cropped at
the specified location and size.
<left> and <right> crop in pixels.
<top> and <bottom> crop in lines.
<cropmode> is 0 or 1: 0= normal, 1=crop
DCWINON DCWINON <display output #>
<start window #> <end
window #>
Creates windows in a range, beginning with <start
window #> and ending with <end window #>, for
up to 36 windows possible.
DUALVIEW DV <display output #> Arranges a maximum of 2 windows (with
priorities 1 and 2) into dualview formation
according to the priorities assigned to them when
window function was enabled.
<display output #> is the number of the
output displaying the windows.
LENSSIZE LENSSIZE <output #> <hsize>
<vsize>
Adjusts the size of the magnifying lens.