Specifications

. . . . .
RS-232 AND 10/100T PROTOCOL
CXPS Command Set
CXPS Manual Edition 1.08 Reference 109
WALL PROCESSING COMMANDS
Command Syntax Action
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
CLEAREFFECT CLREFFECT Clears all effects in memory, including SSO, SDO,
WINDOW, WALL, and DISSOLVE.
EDGEBLEND EB <output #> <H value> <V
value>
Sets the edgeblending value on a wall output.
MULLION MUL <# of pixels> Compensates for the width of mullion in wall
processing.
PMEDGEBLEND PMEB <H value> <V value> Allows the user to set the edge blending value on a
PMWALL output.
PMMULLION PMMUL <# of pixels> Compensates for the width of the mullion in pixel-
mapped wall processing.
PMWALL PMWALL <# of windows>
<column> <row> ON
To turn on pixel-mapped wall processing.
<# of windows> is the number of windows in
the wall.
PMWALL OFF Turns off pixel-mapped wall processing.
GROUP GRP <group> <output #>
<output #> <output #>
<output #>
Sets four outputs to feed to the quad display as a
group. The gamma, contrast, and brightness on
outputs in this group will track on each other if the
I/O pairs are the same.
GROUPDELETE GRPDEL <group> Deletes the specified group.
GROUPSTATUS GRPSTAT Displays the status of the groups.
WALL WALL <input#> <first
output#> <column> <row> ON
Turns the wall processing on. The CXPS can
support multiple groups of walls. Each group is
identified by its first output number. <column>
and <row> specify the size of the wall.
NOTE: The output channels used by the wall must
be in consecutive order -- you may not skip a
channel when creating a wall.
WALL <input #> <first
output #> <column> <row>
<output #>...<output #> ON
Turns the wall processing on. The CXPS can
support multiple groups of walls. Each group is
identified by its first output number. <column>
and <row> specify the size of the wall.
NOTE: With this command, output channels used
by the wall do not need to be in consecutive order.
WALL <first output #> OFF Turns the wall processing off.
WALLADJ WALLADJ <first output #> Adjusts the position of the wall output. This is an
interactive command.
WALLSW WALLSW <input #> <first
output #>
Routes an input to the wall outputs.
WALLWINSIZE WWS <output #>
<FIT|FILL|CENTER|STRETCH>
Adjusts the size of the window in wall processing
mode.