Specifications

RS-232 AND 10/100T PROTOCOL
CXPS Command Set
108 Reference Edition 1.08 CXPS Manual
RESETNETPASSWORD RSTNPW Resets the network password to default.
Default = blackdiamond
External control must be turned off before this
command is issued. The system should be rebooted
after this command is issued.
IMPORTANT: This command requires assistance
from Black Diamond Video technical support.
RESETOUTPUTTIMING RSTOT <output #> Resets the output timing according to the EDID
information from the display device. If no EDID
information is available, host #5 is used (1280x
1024).
RESTOREDEFAULT RFD Restores the factory defaults for user parameters
When using firmware version 4.85 or previous,
issue this command after installing a new board or
updating firmware, followed by the
rstoutputattr command.
RSM RSM Runs the startup macro manually. After the
Phantom 800 is powered on, the macro will run
automatically.
SECURITY SECURITY <ON | OFF> Turns the password requirement for the GUI
connection on or off.
SETID SETID -model <model name>
-serial <serial #> -date
<date> -password BDVid
Sets the system’s ID.
SETNETPASSWORD SETNPW Sets the network password.
Default = blackdiamond
SETUSB SETUSB <1 | 2> -password
BDVid
Tells the system how many USB boards are in the
system.
SHOWNETWORK SHOWNET Shows the network setup parameters.
SOFTDEINTERLACER SDI <output #> <ON|OFF> Turns the soft deinterlacer ON or OFF for the
specified output channel.
Default = ON.
UNBLANKALLOUTPUT UBAO Unblanks all output channels.
UNBLANKOUTPUT UBO <output #> Unblanks the selected output channel.
UPDATEFIRMWARE UFW Initiates a firmware update.
VERSION VER Returns the firmware version of the system.
VSM VSM Shows the content of the startup macro.
SYSTEM COMMANDS
Command Syntax Action
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .