Specifications

RS-232 AND 10/100T PROTOCOL
CXPS Command Set
106 Reference Edition 1.08 CXPS Manual
HELP H Lists all user commands.
HOSTLIST HLIST Lists the host timing table.
ID ID Returns system information.
INPUTAUTOPOWER INAUTOP <input #> <ON|OFF> Powers a converter connected to the CXPS. This
command should be used the first time the
converter is connected to the CXPS; the converter
will thereafter be powered automatically upon
connection.
INPUTAUTOSENSE INAS <input #> <ON|OFF> Turns the SD input auto sensing on or off.
When autosense is ON, the unit attempts to
automatically identify the format of the input
signal (component, svideo, or composite).
When autosense is OFF, the format of the input
signal must be set using the INPUTFORMAT
command.
Default = ON.
INTESTPATTERN INTP <input #> <host>
<pattern>
Turns on the test pattern <pattern> with host
<host> from the input RGB converter. The
converter generates an RGB host signal internally.
To turn the test pattern generator off, issue the
command intp F <host>. Although it is
required, the <host> setting is ignored.
Test patterns <pattern>:
0 color bars
1 grey ramp
2 red ramp
3 green ramp
4 blue ramp
5 grey 64 steps
6 red 64 steps
7 green 64 steps
8 blue 64 steps
9 Auto Calibration
F Turns the test pattern generator off
Output modes <host>:
0 800x600
1 1024x768
2 1280x1024
3 1600x1200
4 1920x1080
5 1920x1200
IPADDRESS IPADDR <ip address> Sets the static IP address for network use.
IPGATEWAY IPGW <ip gateway> Sets the network gateway.
IPNETMASK IPNM <net mask> Sets the network mask.
SYSTEM COMMANDS
Command Syntax Action
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .