Specifications

RS-232 AND 10/100T PROTOCOL
CXPS Command Set
104 Reference Edition 1.08 CXPS Manual
SWITCH SW <input #> <output #> Routes the input to the output. An input can be
routed to more than one output.
SWITCHBO SWBO <output #> Blanks the specified output. This output will be
unblanked automatically when an active input is
switched to it.
NOTE: For firmware version 4.80 and above.
UPPER UPPER <output #> <0-200> Adjusts the upper level of the input mapped to the
specified output channel.
UPPER <red|green|blue>
<output #> <0-200>
Adjusts the upper level of the chosen color at the
output.
USB USB <mode> <mode> is “lock” or “free”. When in lock mode,
USB switch will follow the video switch
assignment (e.g. sw 1 2 will also switch USB 1 to
2). In free mode, USB switch will not follow the
video switch assignment, and the user must issue
the USBSW command to perform USB switching.
USBSTATUS USBSTAT Displays the USB I/O connections and also the
USB mode selected.
USBSWITCH USBSW <usb input #> <usb
output #>
Performs USB switching.
VIDEOFORMAT VFMT <input #> Returns the video format of the specified input
channel.
YUV YUV <output #> <ON|OFF> Turns YUV support on or off.
SYSTEM COMMANDS
Command Syntax Action
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
BAUD BAUD <9600|1920|38400|
57600|115200>
Changes the baud rate of the RS-232
communication.
BLANKALLOUTPUT BAO Blanks all output channels.
BLANKOUTPUT BO <output #> Blanks the selected output channel.
COPYEDID CPEDID <output #> <input #> Copies the EDID from the display device to the
input. NOTE: Before issuing this command,
disconnect the input from the source.
COPYEDIDTIMING CPET <output #> <slot #> Copies output timing from the output to the output
host slot, assuming the output timing is created
from EDID information.
COPYINEDID CPINEDID <input#>
<output #>
Copies the input’s EDID to the output and
programs the display device connected to that
output with the input’s EDID information.
SWITCHING COMMANDS
Command Syntax Action
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .