2
VC500 Quick Installation Guide System requirement ⚫ ⚫ ⚫ ⚫ ⚫ ⚫ Inter Pentium4 1.4G CPU, recommended Pentium4 2.0G or higher Windows 7, 8, 8.1 and 10 Memory 128M min, recommend 256M or higher A high speed USB2.0 interface VGA card supports DirectX9.0 CD/DVD-ROM (for installation) Note: The full installation disk can be downloaded at: http://www.dmmdownload.com/downloads/CURRENT/PVR/VC500W10PD_Complete_install.
VC500 Connection Diagram Note: make sure you connect the V500 inputs to your video source (VHS or Camcorder) outputs. The device source example; your VCR will be labeled Video out. Connect the Yellow cable to the Yellow video out of the source. Connect the Red and White cable to the audio out of the source. You also have the option to use the S-Video input but note you still need to connect the red and white audio cables.
the light is red there is a hardware problem and you should try another USB port. Once plugged in Windows may display “New Hardware Device” found. Please choose “Cancel” and continue to the next step. Step2: Insert the installation CD and open up the CD contents. Note: you may have to double click on your CD/DVD drive while the disk is in the drive to see the contents of the disk. Select and run VC500.EXE. If you get a windows User Account Control message, click Yes to allow the app to run.
Step 6: (Optional) If you need to verify the driver installation open the windows device manager. Under “Sound, video and game controllers”. You should see two new devices "USB2.0 Audio Capture" and "USB2.0 Video Capture" as shown below: Installing Power Director Capture and Editing Software.
Step 1: Click “Power Director” as shown below: Step 2: Select your preferred language and click “OK” Step 3: Click “Yes” to accept the license agreement to continue the “PowerDirector” installation.
Click “Next” As shown below: Step 5: PowerDirector" installation is now in progress ...
If you choose not to launch the Power Director you can do so later by Double-clicking on the desktop icon " " to launch the "PowerDirector" program. Step 8: Select the video aspect ratio and then click on full feature editor Step 9: Please enter the license key to activate the program. Key is located on the CD Jacket and click “Next”.
Step 10: Select "Full Feature Editor" modules to enter video capture interface.
How to use PowerDirector basic settings. Note: the full users guide is located on the installation disk, in the folder named Manual. Capture module. It will detect video format automatically, or click “Settings” to change it. (Default settings are recommended for North America. Outside of North America you may have to change the video standard settings If you are using the red, white and yellow composite video connectors there is no need to change the video source settings.
Choose video format and location of recorded files. Please click”?” button to get online help. Ez Grabber Installation: Ez Grabber is a simple capture tool. If you want to capture, edit and burn to DVD we recommend using the Power Director application and only use Ez Grabber if you just want to do a simple video or audio capture to store locally or external storage drives.
Step 1: Insert the installation CD and run the VC500.EXE file located in the root of the installation CD Note: if you get a user account warning just click Yes to continue and you should get the menu as shown below: Step 2: Click on Ez Grabbeer to begin the installation Step 3: Select your language and click OK.
Using Ez grabber: Control Features: 1. Video Preview screen 2. Setup Menu. Here you can change your video format, video source, picture adjustments, One Touch Capture button actions, Snapshot format, video record formats and recorded video destination folder. 3. Snapshot icon. Click here to create a snapshot still photo of your video 4. Record start button. Click to start recording video 5. Record stop button.
Technical Support Diamond Technical Support staff is here to help resolve any issues that you may be experiencing. Prior to contacting technical support please make sure you have the following information available. 1. Model #: (Printed on the bar code, located on the box) 2. Installation CD Version: (printed on the CD label) 3. The version of Windows that your system is running. 4. The manufacturer and model # of your computer. 5. CPU type and speed (example: Intel Pentium4 2.4GHZ) 6.