CONVERTIBLE SPEAKER INSTALLATION MANUAL D652 | D662 | D672
SPECIAL THANKS Dear Valued Customer, Thank you for choosing Diamond Audio D6 speakers. These speakers represent the latest advances in acoustic technology, and like all Diamond Audio products, are hand built and tested using the highest grade components and state of the art techniques. When installed properly, they will provide many years of accurate sound reproduction. Please keep in mind that prolonged exposure to sound pressure levels in excess of 100 dB can cause permanent hearing loss.
D6 CONVERTIBLE SPEAKER SYSTEMS FEATURES CONVERTIBILITY • Hard Annodized Aluminum Cone • Rubber Surround • High Density Proprietary Composite Frame • Flat Progressive Spider • Inductively Controlled Motor Design • Rubber Boot Magnet Protector • Model Specific Crossovers Your new D6 speaker system has the unique ability to be used as either a component or a coaxial speaker.
MIDBASS SPEAKER MOUNTING The following illustrations show the parts included and correct mounting assembly of the D6 midbass speaker and tweeter. The grill on the midbass is optional. Parts List (2) D6 Component Midbass/Midrange Speakers (2) D6 Component Tweeters (2) D6 Grills w/ Mounting Ring (except D672) (2) Mounting Gaskets (1) Mounting Hardware Kit Screw Clips Gasket Mounting Screws Mid-bass Driver Grill 4 ©2008 Diamond Audio Technologies. All rights reserved.
COMPONENT SYSTEM CONNECTION The illustration below shows how to connect one channel of the D6 component system. Mid-bass Driver Crossover Tweeter Optional RAF Amplifier THIELE/SMALL PARAMETERS Parameter (unit) D652 D662 D672 S.0ta S.0ts Sensitivity 87.4 87.2 86.5 92 91 Qts 0.5 0.82 1.06 0.54 0.65 Fs (Hz) 57.8 60.0 76.0 1650 1520 Vas (L) 11.0 15.6 10.3 n/a n/a Re (ohm) 3.6 3.62 3.5 5.6 5.6 Xmax (mm) 3.6 4.8 4.
PHYSICAL DIMENSIONS Dimension Unit D652 D662 D672 S.0ta/s Total Diameter (A) in. mm 5.57 141.6 6.50 165.4 5.53 x 8.65 140.6 x 219.8 1.9 48.26 Mounting Diameter (B) in. mm 4.60 117.3 5.50 140.6 6.92 x 4.95 176.0 x 125.8 1.64 41.65 Screw Hole Diameter (C) in. mm 5.23 133 6.14 156 8.03 x 4.98 204.0 x 126.7 N/A Mounting Depth (D) Magnet Diameter (E) in. mm in. mm 2.16 55 3.07 78 2.32 59 3.40 86.4 2.25 57.2 3.07 78.0 0.5 12.7 N/A 7 ©2008 Diamond Audio Technologies.
LIMITED SPEAKER WARRANTY STATEMENT Diamond Audio Technologies (DAT) warrants this product to be free from defects in material and workmanship for a period of one (1) year from the original date of purchase provided it was purchased from an authorized DAT retailer within the United States. However, if this product was installed by the authorized DAT retailer, the warranty period will be extended to three (3) years.
