SUBWOOFER INSTALLATION MANUAL HP10 | HP12 | HP15
SPECIAL THANKS Dear Valued Customer, All of us at Diamond Audio would like to thank you for your purchase of a HEX Pro speaker system. HEX Pro component systems and subwoofers are the very best speakers available for use in the automobile environment. By choosing these products you recognize the value in using only the best. With our proprietary HEX™ cones and neo motors that utilize our patented TDX™ technology, we know you will be satisfied with these systems for years to come.
TDX™ TECHNOLOGY Thermal-Dyne eXtreme™ is a fundamentally different solution. The concept is simple, eliminate the detrimental effects of heat in a loudspeaker system. The solution however, is quite complex. Our engineers decided to start with a fresh sheet of paper and build a new line of products that addressed the thermal problems and shortcomings of conventional designs while significantly raising the existing level of performance.
FEATURES • TDX Technology™ (Thermal Dyne eXtreme)™ • Proprietary Composite Hex Cone Technology FEATURES • Nitrile Butadine Rubber (NBR) Surround • Die-cast Aluminum Frame TDX Technology™ (Thermal Dyne eXtreme)™ • Dual Progressive Poly-Aramid Composite Fiber Spiders Proprietary Composite Hex Cone Technology • Integrated Radial Venting Nitrile Butadine Rubber (NBR) Surrounds • Aluminum Dust Cap Die-cast Aluminum Frames • Ultra-high Energy Neodymium Magnet Structure Dual Progressive Poly-Aramid Composite Fiber
THIELE/SMALL PARAMETERS Parameter (unit) SPL (dB) @2.83v HP10 82.80 Z (Ω) (series) Re (Ω) (series) Qms Qes Qts Fs (Hz) Vas (liters) Sd (cm2) BL (T*M) Xmax (mm) Pwr (W) nom/max 4 3.96 5.822 0.585 0.532 26.109 19.988 332 17.971 17 600/1200 Parameter (unit) SPL (dB) @2.83v Z (Ω) (series) Re (Ω) (series) Qms Qes Qts Fs (Hz) Vas (liters) Sd (cm2) BL (T*M) Xmax (mm) Pwr (W) nom/max HP12 85.40 4 3.98 5.532 0.495 0.454 24.964 36.178 490 21.984 19 800/1600 Parameter (unit) SPL (dB) @2.
Magnet Diameter PHYSICAL DIMENSIONS 5.8 (E) 0.11 Displacement (ft3) (A) (C) (B) (E) (B) Dimension (Inches) HP10 HP12 HP15 3 3 3 Total Diameter (A) only. Assistance 10.7” (272mm) (315mm) 15.6” (396mm) s suggestions from an12.4”authorized Mounting Diameter (B) 9.4” (239mm) 11.1” (282mm) 14.2” (360mm) designing the correct system for your vehicle. All 14.8” (376mm) Screw Hole Diameter (C) 9.98” (254mm) 11.7” (297mm) Mountingdriver Depth (D)and vent displacement 7.
RECOMMENDED ENCLOSURES The enclosures specified below are offered as suggestions only. Assistance from an authorized Diamond Audio retailer is recommended for designing the correct system for your vehicle. All volumes below are shown as gross internal volumes, driver and vent displacement has been accounted for. The use of a 30 Hz. sub-sonic filter is recommended on most vented enclosures. HP10 Sealed Optimum Large Vb (ft ) 0.6 1.25 3 51 52 Qtc F3 (Hz) 0.705 0.
LIMITED SPEAKER WARRANTY STATEMENT Diamond Audio Technologies, LLC (DAT) warrants this product to be free from defects in material and workmanship for a period of one (1) year from the original date of purchase provided it was purchased from an authorized DAT retailer within the United States. However, if this product was installed by the authorized DAT retailer, the warranty period will be extended to three (3) years.
