Specifications

CORONA User Manual Rev A.11 www.diamondsystems.com Page 15
6.7 PCIe Routing Jumper (J13)
Jumper block, J13, determines the PCIe bus routing on Corona. The default setting routes the PCIe bus to the
PLX switch for the mini-PCI WiFi module. For applications not using the WiFi module, the PCIe bus can be
rerouted to the SUMIT-A connector and passed up the stack.
Pins 7 and 8 on jumper block J13 determine the PCIe routing. All of the other pins and jumpers are reserved for
factory use only.
Reserved
1
2
Reserved
Reserved
3
4
Reserved
Reserved
5
6
Reserved
Ground
7
8
PCIe select
Jumper Block J13
J13 Pins 7 / 8
Description
Short: PCIe routed to PLX switch
(default)
Open: PCIe routed to SUMIT-A