Specifications

Cascade Modem Manual
Copyright © 2007 Diamond Traffic Products, Inc
Page 20
+MS – Select Modulation
AT+MS sets the modulation and data rates to be
supported by the modem. The command format
is: AT+MS=a,b,c,d,e,f<CR>
a – modulation type
V21 – V.21 (300 bps)
V22 – V.22 (1200 bps)
V.22B – B.22bis (1200 or 2400 bps)
V32 – V.32 (4800 to 9600 bps)
V32B – V.32bis (4800 to 14,400 bps)
V34 – V.34 (16,800 to 33,600 bps)
V90 – V.90 (to 56,000 bps)
b- Automode Detection
0 – Automatic Negotiation Disabled
1 – Automatic Negotiation Enabled
c – Min receive data rate (300-56000 bps)
d – Max receive data rate (300-56000 bps)
e – Min transmit data rate (300-56000 bps)
f – Max transmit data rate (300-56000 bps)
+VCID=n – Caller ID Enabled
n=0 No Caller ID*
n=1 Formatted Caller ID Data presented
n=2 Raw Caller ID Data presented
+VCDT=n – Caller ID Type
n=0 On only after first ring
n=1 CID Always On
n=2 UK CID Format
n=3 Japanese CID Format