Instruction manual

5.h. File Deletion

If all the examples have been followed, several files will have been created in memory. You may remove unwanted

files, using the Delete Files Option, available from either “Collecting or Not Collecting” Menu.

If the system is in sleep mode, press ENTER to wake the counter up. The display will show:

Press the arrow (or press “2”) until the display shows:

Press ENTER to select the option.

This example shows that there are 4 files in memory. Press the arrow keys until

the option “Single” appears and press ENTER.

This shows file #1 Site ID is HWY58. The n means the file has not been

retrieved. 2176 is the file size in bytes, and 01/01/07 was the date the file was

collected. By pressing the arrow keys, different files showing the same

information will appear in the display. Select #1 and press ENTER

Press the arrow key to toggle to “Yes”. Press ENTER.

This will appear while the counter is deleting the file.

This shows that the next file (the old #2) has become file #1 after you deleted the

old file #1. You can delete more files, or press CLEAR to back up one step.

Note that the number of files has changed. Press CLEAR again.

You are now back to the original menu you started at.