Instruction manual

This question is asked if you selected any combination that includes Loops in the

Sensor selection screen. You must enter the Length of the loop used for this

lane. If you have entered Loop-Loop, it is the length of the Second Loop. The

Phoenix II uses this information in calculating vehicle length. If you are doing

length classification and the Phoenix is giving over or under lengths, use this

value to correct the length.

The following questions ask which bins you want to enable for data collection. At least one bin must be enabled. All bins

may be enabled; however, it is suggested the user read Appendix B (memory Usage) to determine if enough memory is

available.

Select Yes or No for each of these options to turn on or off the type of data

collection.

Enter the length of the Record Interval you want to use.