Manualshelf

user manual

ManualsBrandsDiamond Systems ManualsComputer HardwareCorporation Computer Hardware Low-Power PC/104 CPU Board With ZFx86 Processor
11121314151617181920
Prometheus-LC CPU User Manual V1.0 Page 15
The different configurations for J10 are shown below. Each illustration shows only the jumper of
interest. An asterisk (*) indicates the default setting.
5.2 Watchdog Timer & System Recovery – J6
J6 is used to configure the watchdog timer and enable system recovery (failsafe mode) in case of
BIOS corruption. This jumper has different dimensions than J10 and J13, and the jumpers are not
interchangeable.
Watchdog timer operation is described in detail on page 18.
Failsafe mode operation is described on page 19.