User guide

TYROLIT Hydrostress AG
Page 18 SB
Diamond wire lengths
The total diamond wire storage capacity of the SB wire saw is 10 m.
The feed motion takes place when the wire is pulled into the machine. This is done by swivel-
ling the rocker with the drive rollers upwards. The wire lengths that are pulled into the machine
are shown in the "Diamond wire lengths" table.
6.86.8
Diamond wire length
Storage Rocker down + L2 (rocker up) = Total length
L1 without storage 5,50 m 2,00 m (L1+L2) = 7,50 m
L1 + storage A 7,50 m +2,00 m = 4,00 m (L1+L2) = 9,50 m
L1 + storage B 9,50 m +2,00 m = 6,00 m (L1+L2) = 11,50 m
L1 + storage C 11,50 m +2,00 m = 8,00 m (L1+L2) = 13,50 m
L1 + storage D 13,50 m +2,00 m = 10,00 m (L1+L2) = 15,50 m
Diamond wire length
Storage Rocker down + L2 (rocker up) = Total length
L1 without storage 5,50 m 2,00 m (L1+L2) = 7,50 m
L1 + storage A 7,50 m +2,00 m = 4,00 m (L1+L2) = 9,50 m
L1 + storage B 9,50 m +2,00 m = 6,00 m (L1+L2) = 11,50 m
L1 + storage C 11,50 m +2,00 m = 8,00 m (L1+L2) = 13,50 m
L1 + storage D 13,50 m +2,00 m = 10,00 m (L1+L2) = 15,50 m