User guide

TYROLIT Hydrostress AG
Page 13SB
Servicing and maintenance
Maintenance table
55
5.15.1
Maintenance and servicing table
Before every commissioning At end of work Weekly Yearly After faults After damage
SB wire saw Retighten loose screws and nuts 
X X X
Drive rolls and
guide rolls
Check the bandages for wear, see 5.2
X X X X
Check bearings
X X X
Clean
X X X
Hydraulic cylinder Check for cleanliness / damage
X X X X
Lubrication
X X X
Drive motor Check for cleanliness / damage
X X X X
Couplings Check for cleanliness / damage
X X X X
Water economy Check the water line for cleanliness
and leak-tightness.

X X X
Blow out water
X
Diamond wire Clean with water
X
Check for wear
X X X X
Service To be performed by TYROLIT Hydros-
tress AG or an authorised workshop
 After 100 / 300 / 500 / 700 hours
Maintenance and servicing table
Before every commissioning At end of work Weekly Yearly After faults After damage
SB wire saw Retighten loose screws and nuts 
X X X
Drive rolls and
guide rolls
Check the bandages for wear, see 5.2
X X X X
Check bearings
X X X
Clean
X X X
Hydraulic cylinder Check for cleanliness / damage
X X X X
Lubrication
X X X
Drive motor Check for cleanliness / damage
X X X X
Couplings Check for cleanliness / damage
X X X X
Water economy Check the water line for cleanliness
and leak-tightness.

X X X
Blow out water
X
Diamond wire Clean with water
X
Check for wear
X X X X
Service To be performed by TYROLIT Hydros-
tress AG or an authorised workshop
 After 100 / 300 / 500 / 700 hours