DIAMOND PRODUCTS CONCRETE SAW PARTS LIST MODEL CC3728 February 2009 Part #1800878
Table of Contents Pictorial Index…………….….……………. 4,5 Engine Assembly…………………………….. 38,39 Controls Legend…….…….….……………. 6 PTO Assembly.……………………..……….. 40 Quick Reference Service Filters / Belts…… 7 Idler Assembly.…….………………………… 41 Frame Upright Assembly……….…………. 8,9 Frame Lift Assembly………………………… 42 Instrument Panel Assembly……………….. 10 Belt Guard Assembly………………………… 43 Throttle Cable Assembly…………………. 11 Front Pointer Assembly……………………… 44 Control Lever Assembly (Eaton)………….. 12 Notes.
Pictorial Page Index 38 42 20 21 10 19 18 14 13 44 15 40 8 46 48 50 52 54 34 35 16 36 22 32 41 31 Shown with Sundstrand Transmission 4 28
Pictorial Page Index 38 20 10 21 8 14 15 12 17 44 16 43 24 22 26 30 36 34 35 32 33 46 48 50 52 54 Shown with Eaton Transmission 5
Controls Legend 1 2 3 4 5 6 7 8 9 10 11 12 Ignition Switch Alternator Light Oil Temperature Light Oil Pressure Light Vernier Throttle Control Hour Meter Pre-Cleaner Air Cleaner Restriction Indicator Depth Stop Knob Cutting Depth Indicator Water Valve Emergency Stop Button 13 14 15 16 17 18 19 20 21 22 23 Handle Lock Knobs Speed Control Lever Lower Pushbutton Raise Pushbutton Fuel Tank Cap Transmission Engagement Lever * Transmission Engagement Lever ** Water Safety Switch (Optional) Spotlight Switch (Opt
Quick Reference Service Filters / Belts DP Part No. Description Manufacturer's Part No.
Frame Upright Assembly #6012202 22 18 10 13 21 17 14 9 10 9 13 8 26 28 8 15 12 23 11 13 26 12 25 19 16 27 24 20 13 5 24 2 5 3 6 4 7 1 4 7 8
Frame Upright Assembly #6012202 ITEM 1 PART NO. 6012138 QTY. 1 DESCRIPTION Frame Upright Weldment 2 2900013 2 Cap Screw, Hex Hd., 3/8-16 x 1-1/4" 3 4 2900014 2900018 2 2 Flat Washer, 3/8" SAE Lock Nut, 3/8-16 Nylon 5 2900499 4 Cap Screw, Hex Hd.
Instrument Panel Assembly #6012162 9 (Includes Items #1, #7 - #20) 11 8 12 17 18 19 13 9 20 11 14 7 6 2 11 14 10 15 1 5 3 4 16 10 ITEM 1 PART NO. 6012041 QTY.
Throttle Cable Assembly #6010729 13 14 15 4 8 6 5 12 16 2 1 7 3 9 11 10 ITEM PART NO. QTY. 1 6010523 1 Throttle Bracket 2 2500940 1 Throttle Cable Clamp 3 2900015 2 Machine Screw, Hex Hd., #10-24 x 3/4" 4 2900017 2 Lock Nut, #10-24 Nylon 5 2900310 4 Cap Screw, Hex Hd., M6 x 20mm 6 2900302 2 Lock Nut, M6 Nylon 7 6013029 1 Throttle Arm 8 2900024 2 Lock Washer, 1/4" Split 9 6048212 1 Pivot Pin 10 2900059 1 Set Screw, Soc. Hd.
Control Lever Assembly #6012125 (Eaton) 15 14 2 2 1 3 3 11 16 7 13 6 5 12 7 3 7 8 9 5 2 10 4 12 ITEM PART NO. QTY. 1 6012057 1 DESCRIPTION Lever Support Weldment 2 2900144 6 Cap Screw, Hex Hd.
Control Lever Assembly #6012126 (Sundstrand) 16 2 2 17 3 3 1 4 5 3 7 6 13 14 2 8 13 9 12 12 4 10 14 5 15 4 11 4 7 12 13 ITEM 1 PART NO. 6011018 QTY. 1 DESCRIPTION Lever Support Weldment 2 2900144 6 Cap Screw, Hex Hd.
Control Grip Assembly #6010319 3 1 4 2 4 6 7 8 5 9 14 ITEM PART NO. QTY. DESCRIPTION 1 2501280 1 Control Grip Body 2 2501281 1 Control Grip Cover 3 2500644 1 Plug, Rectangular 4 2500694 2 Plug, 5/8" Hole 5 2800372 1 Pushbutton Switch, Raise 6 2800373 1 Pushbutton Switch, Lower 7 8 9 2900453 1 Set Screw, Soc. Hd., M5 x 12mm 2900452 1 Machine Screw, Oval Hd.
Fuel Tank Assembly #6012163 1 8 16 9 17 19 18 2 16 2 15 10 16 14 7 16 6 13 5 12 11 4 3 6 ITEM PART NO. QTY. DESCRIPTION 1 2500648 1 Fuel Tank 2 3 6011083 2900019 2 4 Fuel Tank Mount Bar Cap Screw, Hex Hd., 5/16-18 x 3/4" 4 2900031 8 Lock Washer, 5/16" Split 5 6 2900022 2900138 8 4 Flat Washer, 5/16" SAE Cap Screw, Hex Hd.
Battery Assembly #6011418 18 18 14 22 21 20 19 15 17 12 9 21 20 16 22 11 7 8 19 5 3 13 10 3 3 4 6 16 4 5 2 4 1 ITEM PART NO. QTY. DESCRIPTION 1 6010670 1 Battery Platform 2 6010554 1 Battery Support Brace 3 2900019 5 Cap Screw, Hex Hd.
Hydraulic Pump Assembly #6011077 (Includes Items #1 - #11) 2 3 11 10 9 4 1 8 11 10 9 7 6 5 12 13 14 ITEM PART NO. QTY. 1 2600070 1 Hydraulic Pump Unit 2 2700321 1 Breather Cap 3 3200120 1 Pipe Coupling, 3/8" NPT 4 3200123 1 Pipe Nipple, 3/8" NPT x 2" 5 3200115 1 Elbow, 3/8" O-Ring to 1/4" F. Pipe 6 3200060 1 Hex Nipple, 1/4" NPT 7 3200056 1 Flow Control Valve, 1/4" NPT 8 3200057 1 Elbow, 1/4" M. Pipe to 1/4" M.
Depth Indicator Assembly #6010214 9 5 8 1 3 7 6 4 7 4 2 10 11 12 13 15 14 18 ITEM PART NO. QTY. DESCRIPTION 1 6010092 1 Depth Indicator Mount Bracket 2 2500155 2 Cable Pulley, 1-1/4" 3 2900008 2 Cap Screw, Hex Hd., 1/4-20 x 1" 4 2900010 4 Lock Nut, 1/4-20 Nylon 5 2900144 2 Cap Screw, Hex Hd., 1/4-20 x 3/4" 6 2500145 1 Flange Bearing, 3/8" 7 2900014 3 Flat Washer, 3/8" SAE 8 6010091 1 Depth Indicator Pointer 9 2900079 1 Cap Screw, Hex Hd.
Depth Stop Assembly #6010215 5 6 4 3 2 1 9 11 8 10 7 ITEM 1 PART NO. 6010097 QTY. 1 DESCRIPTION Depth Stop Weldment 2 2900665 4 Belleville Washer, 1/2" 3 2900058 1 Flat Washer, 1/2" SAE 4 5 2900239 6010095 1 1 Friction Washer, 1/2" Depth Stop Knob 6 2900132 1 Roll Pin, 3/16" x 1-1/4" 7 8 2900158 2900084 1 1 Yoke, 1/2-13 Lock Washer, 1/2" Split 9 2900037 1 Hex Nut, 1/2-13 10 2900007 1 Clevis Pin, 1/2" Dia.
Water Supply Assembly #6012127 10 6 12 11 7 5 12 4 3 14 13 8 14 13 1 3 9 7 8 20 ITEM PART NO. QTY. DESCRIPTION 1 6090068 1 Water Supply Tube 2 3200045 1 Pipe Tee, 1/2" NPT 3 3200008 2 Close Nipple, 1/2" NPT 4 3200022 1 Fitting, 1/2" F. Pipe to 3/4" F. Garden 5 3200025 1 Hose Filter Washer 6 3200013 2 Street Elbow, 1/2" NPT 7 3200027 2 Water Valve 8 3200155 2 Fitting, 1/2" M. Pipe to 3/4" M.
Air Intake Assembly #6012164 3 10 2 11 4 12 1 13 9 12 7 6 14 15 8 5 12 7 6 ITEM 1 PART NO. 2501328 QTY. 1 2501288 1 Outer Primary Filter 2501289 1 Inner Safety Filter 2501185 1 Rubber Dust Ejector Boot 2501389 1 Pre-Cleaner with Clamp & Adapter Ring 3200197 1 Hose Clamp #52 2501996 1 Pre-Cleaner Adapter Ring 3 4 2500423 3200117 1 1 Restriction Indicator Close Nipple, 1/8" NPT 5 2501329 1 Mounting Band, Polymer 6 2900217 2 Cap Screw, Hex Hd.
Frame Base Assembly #6012160 12 5 11 9 13 8 11 8 4 5 6 5 1 2 3 10 4 5 7 22 ITEM PART NO. QTY. DESCRIPTION 1 6012084A 1 Frame Base 2 3 6011021 6012090 2 1 Skid Plate Guard Attachment Plate (25 degree) 4 5 2900014 2900006 4 6 Flat Washer, 3/8" SAE Lock Washer, 3/8" Split 6 2900196 2 Cap Screw, Hex Hd., 3/8-16 x 3/4" 7 2900005 2 Cap Screw, Hex Hd., 3/8-16 x 1" 8 6012038 2 Engine Mount 9 2900025 6 Cap Screw, Hex Hd.
Hydraulic Cylinder Assembly #6010714 4 7 4 6 4 3 5 4 1 2 ITEM PART NO. QTY. DESCRIPTION 1 2500177 1 Hydraulic Cylinder 2 6010031 1 Cylinder Pin, 3" 3 6010119 1 Cylinder Pin, 3-1/2" 4 2900064 4 Hair Pin Cotter, 3/4" 5 3200067 1 Cylinder Breather, 1/4" NPT 6 3200057 1 Elbow, 1/4" M. Pipe to 1/4" M.
Rear Drive Assembly #6012166 (Eaton) 5 12 6 32 13 14 23 1 15 22 2 32 32 24 25 13 14 15 16 26 31 11 10 28 13 30 18 19 13 3 29 8 9 24 18 21 4 7 19 20 26 25 17 25 27 24 20
Rear Drive Assembly #6012166 (Eaton) ITEM PART NO. QTY. DESCRIPTION 1 2 6010068 6010027 1 1 Transmission Platform Weldment Mount Foot, Right Hand 3 6010028 1 Mount Foot, Adjustable 4 2500159 2 Pillow Block Bearing, 3/4" 5 2900005 4 Cap Screw, Hex Hd., 3/8-16 x 1" 6 2900006 4 Lock Washer, 3/8" Split 7 8 6010664 6048229 1 1 Transmission Jackshaft 18T Key, 3/16" Sq.
Eaton Transmission Assembly #6012123 9 20 19 22 21 6 5 18 8 3 7 2 4 14 20 19 14 1 18 10 11 13 15 12 16 17 26 ITEM 1 PART NO. 2600068 QTY. 1 DESCRIPTION Eaton Hydrostatic Transmission 2 3200046 2 Fitting, 3/8" F. JIC to 3/8" Push Lock 3 4 6010060 2900143 1 1 Oil Recirculation Hose, 3/8" I.D.
Linkage Assembly #6012124 5 4 5 4 3 7 4 4 3 3 4 3 3 4 5 4 6 2 3 4 4 4 5 5 8 4 4 1 5 2 3 5 4 ITEM PART NO. QTY. DESCRIPTION 1 6012058 1 Bell Crank 2 2900153 2 3 2900029 7 Friction Washer, 3/8" Cap Screw, Hex Hd.
Rear Drive Assembly #6012167 (Sundstrand) 31 37 21 36 32 34 18 36 35 15 17 15 20 15 9 19 16 10 33 2 24 7 8 16 16 23 7 15 4 22 12 3 13 5 11 25 6 31 16 32 27 14 26 30 15 1 33 27 15 14 28 29 28
Rear Drive Assembly #6012167 (Sundstrand) ITEM PART NO. QTY. 1 2 6010118 2600021 1 1 DESCRIPTION Transmission Platform Hydrostatic Transaxle Assembly 3 6011037 1 Transmission Pulley 3.5" 4 2500519 1 Cooling Fan, 7" 5 2900038 4 Lock Washer, #10 Split 6 2900448 4 Machine Screw, Hex Hd., #10-32 x 1/2" 7 8 2900142 6010170 4 1 Set Screw, Soc. Hd., 5/16-18 x 3/8" Key, 3/16" Sq. x 1" 9 6010129 1 Shift Lever 10 11 2900429 6010120 1 1 Set Screw, Soc. Hd.
Rear Axle Assembly #6012117* (Eaton / Gear) *Use #6012063 for saws prior to January 2008 8 7 6 5 1 4 2 3 30 ITEM PART NO. QTY. DESCRIPTION 1 6012118 1 Rear Axle Weldment w/60 Tooth Gear 2 3 2500873 2500874 2 2 Wheel, 10" Rear with 2" Bore Trantorque Bushing, 1-1/4" 4 2500158 2 Pillow Block Bearing 1-1/4" 5 6010024 2 Rear Axle Bearing Spacer, 1/8" 6 7 2900058 2900084 4 4 Flat Washer, 1/2" SAE Lock Washer, 1/2" Split 8 2900139 4 Cap Screw, Hex Hd.
Rear Axle Assembly #6012050 (Sundstrand / Chain) 8 3 7 6 5 2 9 4 1 ITEM PART NO. QTY. DESCRIPTION 1 6012051 1 Rear Axle Weldment w/35 Tooth Sprocket 2 2500873 2 Wheel, 10" Rear with 2" Bore 3 2500874 2 Trantorque Bushing, 1-1/4" 4 2500158 2 Pillow Block Bearing 1-1/4" 5 6010024 2 Rear Axle Bearing Spacer, 1/8" 6 2900058 4 Flat Washer, 1/2" SAE 7 2900084 4 Lock Washer, 1/2" Split 8 2900025 2 Cap Screw, Hex Hd., 1/2-13 x 1-1/4" 2 Cap Screw, Hex Hd.
Front Axle Assembly #6012091 12 9 8 10 11 1 3 4 5 6 2 7 8 9 32 ITEM 1 PART NO. 6012092 QTY. 1 DESCRIPTION Front Axle Weldment 2 6010581 2 Wheel Assembly, 8" Front 3 2501393 2 Wheel Cover Gasket 4 6010536 2 Wheel Cover 5 2900038 8 Lock Washer, #10 Split 6 2900159 8 Machine Screw, Rd. Hd., #10-24 x 5/8" 7 2900127 2 Flat Washer, 1/2" USS 8 2900084 6 Lock Washer, 1/2" Split 9 2900025 6 Cap Screw, Hex Hd.
Front Wheel Assembly #6010581 2 1 3 4 5 ITEM PART NO. QTY.
Blade Shaft Assembly #6012011 (Blades 14" - 26") 9 3 11 8 7 6 8 7 5 9 3 13 4 8 12 5 7 2 6 1 7 8 2 12 34 ITEM PART NO. QTY DESCRIPTION 1 2 6012003 2500151 1 2 Blade Shaft Blade Shaft Bearing, 1-3/4" 3 2900198 2 Grease Fitting, 1/8" NPT x 1-1/4" 4 6012065 1 Key, 3/8" Sq. x 3-1/2" 5 6010040 2 Key, 1/4" Sq. x 13/16" 6 2900418 2 Set Screw, Soc. Hd., 5/16-18 x 5/8" 7 8 2900002 2900113 6 6 Flat Washer, 5/8" SAE Lock Washer, 5/8" Split 9 2900512 4 Cap Screw, Hex Hd.
Blade Shaft Assembly #6012012 (Blades 30" - 36") 9 3 11 8 7 6 8 7 5 9 3 13 4 8 5 12 7 2 6 1 7 8 2 12 ITEM PART NO. QTY DESCRIPTION 1 2 6012003 2500151 1 2 Blade Shaft Blade Shaft Bearing, 1-3/4" 3 2900198 2 Grease Fitting, 1/8" NPT x 1-1/4" 4 6012065 1 Key, 3/8" Sq. x 3-1/2" 5 6010040 2 Key, 1/4" Sq. x 13/16" 6 2900418 2 Set Screw, Soc. Hd., 5/16-18 x 5/8" 7 8 2900002 2900113 6 6 Flat Washer, 5/8" SAE Lock Washer, 5/8" Split 9 2900512 4 Cap Screw, Hex Hd.
Belt Drive Assembly #6012158 #6012158A #6012158B 3 3 4 4 2 2 1 1 2 2 5 5 2 2 7 2 2 6 2 5 8 6 7 2 #6012158C #6012158D 3 3 4 4 2 2 1 1 6 6 5 5 2 2 8 7 7 6 9 8 36 6 8
Belt Drive Assembly #6012158 14" BLADE DRIVE #6012158A ITEM 1 PART NO. 6012006 QTY. 1 DESCRIPTION Pulley, Accessory Drive 2 3 2900142 6011027 10 1 Set Screw, Soc. Hd., 5/16-18 x 3/8" Key, 3/8" Sq. x 3-1/4" Bevel End 4 6010063 1 Link Belt 5 6011009 2 Sheave, 3.65" x 6 Groove x 1-3/4" Bore 6 2500298 6 V-Belt, 3VX475 ITEM 1 PART NO. 6012006 QTY. 1 2 3 2900142 6011027 6 1 Set Screw, Soc. Hd., 5/16-18 x 3/8" Key, 3/8" Sq.
Engine Assembly #6012157 20 7 19 18 6 5 2 4 3 26 28 29 27 25 1 29 23 24 30 11 10 11 16 22 10 17 21 13 8 11 12 10 14 14 16 17 13 15 8 9 9 38 15
Engine Assembly #6012157 ITEM 1 PART NO. 2600341 QTY. 1 DESCRIPTION Engine, Deutz Model F2L2011 2 2702224 1 Fuel Filter Housing 3 4 2701339 6090417 1 1 Fuel Filter Spacer, 2-1/4" Long 5 2900084 1 Lock Washer, 1/2" Split 6 7 2900482 2900481 1 1 Hex Nut, M12 Eyebolt, M12 x 6" 8 6010659 2 Engine Support Leg 9 2900347 2 Cap Screw, Hex Hd., M12 x 100mm 10 11 2900058 2900327 4 4 Flat Washer, 1/2" SAE Lock Nut, M12 Nylon 12 2900346 2 Cap Screw, Hex Hd.
PTO Assembly #6012159 1 3 2 4 5 6 7 40 ITEM PART NO. QTY. DESCRIPTION 1 2 6012036 2900349 1 3 PTO Shaft Cap Screw, Hex Hd., M14 x 35mm 3 6012155 1 Inner Ring Support 4 2900321 11 Lock Washer, M10 Split 5 2900223 11 Cap Screw, Hex Hd., M10 x 30mm 6 6010509 1 Flange Cartridge Bearing 1-3/4" 7 2900460 4 Cap Screw, Soc. Hd.
Idler Assembly #6012169 2 3 3 4 1 7 9 8 5 10 6 ITEM PART NO. QTY. 1 6012046 1 Idler Arm DESCRIPTION 2 2900037 1 Hex Nut, 1/2-13 3 4 2900058 2900026 2 1 Flat Washer, 1/2" SAE Lock Nut, 1/2-13 Nylon 5 6 2500007 2500074 1 1 Set Collar, 1/2" with Set Screw Idler Pulley 3" 7 2900006 1 Lock Washer, 3/8" Split 8 2900047 1 Cap Screw, Hex Hd.
Frame Lift Assembly #6012161 10 7 8 11 9 1 9 2 3 4 3 5 3 5 6 3 4 42 ITEM PART NO. QTY. DESCRIPTION 1 2 6047952 2900693 1 1 Frame Lift Cap Screw, Hex Hd., 1/2-13 x 3" 3 4 2900058 6012137 4 2 Flat Washer, 1/2" SAE Spacer, 1-3/4" Long 5 2900026 2 Lock Nut, 1/2-13 Nylon 6 2900758 1 Tap Bolt, Hex Hd., 1/2-13 x 5" 7 8 6012040 2900013 1 1 Frame Lift Brace Cap Screw, Hex Hd., 3/8-16 x 1-1/4" 9 2900018 2 Lock Nut, 3/8-16 Nylon 10 2900029 1 Cap Screw, Hex Hd.
Belt Guard Assembly #6012142 6 1 5 7 8 5 6 2 7 8 3 4 2 3 8 4 7 6 5 4 10 3 2 9 2 3 4 11 ITEM PART NO. QTY DESCRIPTION 1 6012089A 1 Belt Guard Weldment 2 3 2900473 2900006 5 5 Flat Washer, 3/8" USS Lock Washer, 3/8" Split 4 2900005 5 Cap Screw, Hex Hd., 3/8-16 x 1" 5 6010558 3 Guard Mounting Tab, 3/8-16 6 7 2900022 2900031 6 6 Flat Washer, 5/16" SAE Lock Washer, 5/16" Split 8 2900019 6 Cap Screw, Hex Hd.
Front Pointer Assembly #6011220 11 5 10 6 3 3 4 1 12 10 9 2 2 7 7 8 44 ITEM PART NO. QTY. 1 6010541 1 Front Pointer Frame 2 6011152 2 Front Pointer Arm 3 6010009 1 Front Pointer Rod 4 2500740 1 Pointer Cap 5 2501409 1 Wheel, 6" DESCRIPTION 6 2500007 2 Set Collar, 1/2" with Set Screw 7 2900105 2 Cap Screw, Hex Hd., 1/2-13 x 2-3/4" 8 2900026 2 Lock Nut, 1/2-13 Nylon 9 2900005 2 Cap Screw, Hex Hd.
Notes ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ________________________
14" Blade Guard Assembly #6010600 21 19 20 9 9 4 4 11 10 7 18 12 20 8 6 1 13 17 3 16 4 2 13 6 6 5 14 10 46 15
14" Blade Guard Assembly #6010600 ITEM PART NO. QTY. 1 6010601 1 DESCRIPTION 14" Blade Guard Front & Rear Only 2 6010081 1 Splash Flap 3 2900008 2 Cap Screw, Hex Hd., 1/4-20 x 1" 4 2900009 4 Flat Washer, 1/4" SAE 5 2900083 2 6 2900010 8 Fender Washer, 1/4" x 1-1/4" Lock Nut, 1/4-20 Nylon 7 6010261 1 Water Manifold 8 2500830 1 9 2900294 2 Water Manifold Gasket Cap Screw, Hex Hd., 1/4-20 x 2" 10 3200001 3 Plug, 1/8" NPT 11 3200002 1 Fitting, 3/4" M. Pipe to 3/4" M.
20" Blade Guard Assembly #6010602 19 18 9 9 11 4 4 10 12 7 20 8 1 17 13 6 16 3 4 2 6 13 6 14 10 48 15 5
20" Blade Guard Assembly #6010602 ITEM PART NO. QTY. 1 6010603 1 DESCRIPTION 20" Blade Guard Front & Rear Only 2 6010081 1 Splash Flap 3 2900008 2 Cap Screw, Hex Hd., 1/4-20 x 1" 4 2900009 4 Flat Washer, 1/4" SAE 5 2900083 2 6 2900010 8 Fender Washer, 1/4" x 1-1/4" Lock Nut, 1/4-20 Nylon 7 6010261 1 Water Manifold 8 2500830 1 9 2900294 2 Water Manifold Gasket Cap Screw, Hex Hd., 1/4-20 x 2" 10 3200001 3 Plug, 1/8" NPT 11 3200002 1 Fitting, 3/4" M. Pipe to 3/4" M.
26" Blade Guard Assembly #6010604 22 21 20 24 10 11 23 7 9 8 19 4 18 12 14 13 1 3 17 4 2 14 6 15 6 11 16 50 5
26" Blade Guard Assembly #6010604 ITEM PART NO. QTY. 1 6010605 1 DESCRIPTION 26" Blade Guard Front & Rear Only 2 6010081 1 Splash Flap 3 2900008 2 Cap Screw, Hex Hd., 1/4-20 x 1" 4 2900009 4 Flat Washer, 1/4" SAE 5 2900083 2 6 2900010 6 Fender Washer, 1/4" x 1-1/4" Lock Nut, 1/4-20 Nylon 7 6010261 1 Water Manifold 8 2500830 1 9 2900024 2 Water Manifold Gasket Lock Washer, 1/4" Split 10 2900294 2 Cap Screw, Hex Hd.
30" Blade Guard Assembly #6010606 22 21 20 24 10 11 7 23 9 8 19 4 12 14 18 13 1 17 3 4 2 14 15 6 11 52 16 6 5
30" Blade Guard Assembly #6010606 ITEM PART NO. QTY. 1 6010607 1 30" Blade Guard Front & Rear Only 2 6010081 1 Splash Flap 3 2900008 2 Cap Screw, Hex Hd., 1/4-20 x 1" 4 2900009 4 Flat Washer, 1/4" SAE 5 2900083 2 Fender Washer, 1/4" x 1-1/4" 6 2900010 6 Lock Nut, 1/4-20 Nylon 7 6010261 1 Water Manifold 8 2500830 1 Water Manifold Gasket DESCRIPTION 9 2900024 2 Lock Washer, 1/4" Split 10 2900294 2 Cap Screw, Hex Hd.
36" Blade Guard Assembly #6010608 25 24 23 10 27 9 11 26 20 4 19 7 18 8 22 14 21 12 13 1 17 3 4 2 14 15 6 11 54 16 6 5
36" Blade Guard Assembly #6010608 ITEM PART NO. QTY. 1 6010609 1 36" Blade Guard Front & Rear Only DESCRIPTION 2 6010081 1 Splash Flap 3 2900008 2 Cap Screw, Hex Hd., 1/4-20 x 1" 4 2900009 4 Flat Washer, 1/4" SAE 5 2900083 2 Fender Washer, 1/4" x 1-1/4" 6 2900010 6 Lock Nut, 1/4-20 Nylon 7 6010264 1 Water Manifold for 36" Guard 8 2500830 1 Water Manifold Gasket 9 2900024 2 Lock Washer, 1/4" Split 10 2900294 2 Cap Screw, Hex Hd.
Optional Water Pump Assembly #6011032 9 10 1 5 7 6 5 6 8 7 2 3 3 4 8 56 ITEM PART NO. QTY. 1 2600200 1 Water Pump, 12V Diaphragm 2 2900008 4 Cap Screw, Hex Hd.
Optional Water Safety Switch Assembly #6010522 2 3 1 4 5 ITEM PART NO. QTY.
Optional Spot Light Assembly #6010112 8 7 6 5 5 1 4 3 2 58 4 DESCRIPTION ITEM PART NO. QTY. 1 2500194 1 Spot Light, 12 Volt 2 6010106 1 Light Bar 3 6010107 1 Light Bar Mount Bracket 4 2400157 2 Hand Lock Knob, 5/16-18 x 1" 5 2900144 2 Cap Screw, Hex Hd.
Optional Magentic Spot Light Assembly #6011170 1 2 5 3 2 4 1 DESCRIPTION ITEM PART NO. QTY.
Optional Glow Plug Assembly #6010596 1 2 60 ITEM 1 PART NO. 2701698 QTY.
Optional Lowering Speed Metering Valve Assembly #6010227 9 1 5 7 2 6 5 3 1 8 4 3 DESCRIPTION ITEM PART NO. QTY. 1 3200211 1 Valve, 1/4" Metering 2 3200212 1 Panel Mounting Kit 3 3200057 2 Elbow, 1/4" M. Pipe to 1/4" M. JIC 4 3200115 1 Elbow, 3/8" O-Ring to 1/4" F. Pipe 5 3200213 2 Tee, 1/4" M. JIC to 1/4" M. Pipe 6 3200219 1 Adapter, 1/4" M. Pipe to 1/4" F.
Optional Free Wheeling Clutch Assembly #6010179 (Sundstrand) 9 26 28 24 28 27 17 25 31 18 16 15 30 20 27 29 29 12 4 18 11 5 3 10 16 14 23 6 13 17 2 9 8 7 18 1 21 18 19 62 22 19
Optional Free Wheeling Clutch Assembly #6010179 (Sundstrand) DESCRIPTION ITEM PART NO. QTY. 1 6011043 1 Clutch Clamp 2 2900233 1 Cap Screw, Soc. Hd., 5/16-18 x 1-1/2" 3 6011044 1 Clutch Brace 4 2900508 1 Cap Screw, Hex Hd., 5/16-18 x 1-1/2" 5 2900031 1 Lock Washer, 5/16" Split 6 6011089 1 Key, 1/4" Sq. x 1" Long 7 2900383 1 Fender Washer, M8 8 2900024 1 Lock Washer, 1/4" Split 9 2900023 2 Cap Screw, Hex Hd.
Optional Parking Brake Assembly #6011228 20 8 23 22 7 23 9 6 19 21 1 15 4 5 22 21 16 10 11 12 64 3 13 17 18 2 14
Optional Parking Brake Assembly #6011228 ITEM PART NO. QTY. 1 2 6011229 2501664 1 1 3 4 5 6 7 8 6011230 6048229 6011231 2900083 2900024 2900082 1 1 1 1 1 1 9 10 6011232 2900473 1 1 11 12 13 14 2900474 2900005 6011234 2900632 1 1 1 1 15 16 17 2900037 2900014 2900006 1 2 2 18 19 2900196 6011233 2 1 20 21 22 23 2500002 2900022 2900019 2900039 1 2 2 2 DESCRIPTION Bearing Housing Bar Ball Bearing, 3/4" x 1-5/8" x 7/16" Pivot Pin Key, 3/16" Sq.
Optional Blade Stacking Assembly #6010630 (Up to 1-1/2" width) 5 14 4 3 9 2 15 12 16 13 18 17 21 23 18 6 22 8 9 20 11 20 7 19 19 11 15 11 66 15 10 1
Optional Blade Stacking Assembly #6010630 (Up to 1-1/2" width) ITEM PART NO. QTY. DESCRIPTION 1 6010159 1 Outer Flange 4-1/2" with Pin 2 2900002 1 Flat Washer, 5/8" SAE 3 2900113 1 Lock Washer, 5/8" Split 4 2900210 1 Cap Screw, Hex Hd., 5/8"-11 x 5" LH 5 6010620 1 20" Wide Blade Guard Assembly ITEM PART NO. QTY. 6 6010621 1 20" Wide Blade Guard Front & Rear Only 7 6010296 1 Splash Flap 8 2900008 2 Cap Screw, Hex Hd.
Optional Blade Spacing Assembly #6010631 (Up to 2" width) 5 4 14 9 2 15 1 12 16 13 3 18 17 21 23 18 6 22 8 9 20 11 20 7 19 19 11 15 11 68 15 10
Optional Blade Spacing Assembly #6010631 (Up to 2" width) ITEM PART NO. QTY. DESCRIPTION 1 6010186 1 Blade Shaft Extension, Left Hand Thread 2 6010187 1 Outer Flange 4-1/2" 3 2900218 1 Dowel Pin, 3/8" Dia. x 3-1/2" 4 2900212 1 Hex Nut, 1"-14 Left Hand 5 6010620 1 20" Wide Blade Guard Assembly ITEM PART NO. QTY. 6 6010621 1 20" Wide Blade Guard Front & Rear Only 7 6010296 1 Splash Flap 8 2900008 2 Cap Screw, Hex Hd.
Optional Blade Spacing Assembly #6010632 (Up to 4" width) 5 4 2 1 24 14 16 9 15 3 12 17 23 13 6 21 22 8 9 7 18 18 11 10 19 11 15 70 11 20
Optional Blade Spacing Assembly #6010632 (Up to 4" width) ITEM PART NO. QTY. DESCRIPTION 1 6010309 1 Blade Shaft Extension, Left Hand Thread 2 6010187 1 Outer Flange 4-1/2" 3 6010359 1 Drive Pin, 3/8" Dia. x 5" 4 2900212 1 Hex Nut, 1"-14 Left Hand 5 6010622 1 20" Wide Blade Guard Assembly ITEM PART NO. QTY. 6 6010623 1 20" Wide Blade Guard Front & Rear Only 7 6010366 1 Splash Flap 8 2900008 3 Cap Screw, Hex Hd.
Optional Shaft Tachometer Assembly #6012168 8 15 3 13 14 9 1 11 2 11 4 7 13 11 11 12 10 7 5 6 10 11 72 ITEM 1 PART NO. 6012042 QTY. 1 DESCRIPTION Gauge Panel 2 1800948 1 Blade RPM Decal 3 6010416 1 Tach/Hour Meter (VDO) Calibrated 4 5 2800397 6011421 1 1 Tach Sensor Wire Harness Shaft Tach Gear Assembly ITEM 6 PART NO.
Decal Group CORE CUT DECAL #1800289 (Qty.
Wiring Diagram Item Part No. Qty. Item Part No. Qty.
Options Wiring Diagram 76 Item Part No. Qty. Description Item Part No. Qty.
Notes ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ________________________
Notes ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ________________________
Blade Speed Conversion Charts WARNING: Do not exceed blade speed (RPM) shown for each blade size. Excessive blade speed could result in blade breakage and serious personal injury! Blade Shaft Blade Size Max. Depth of Cut Engine No Load RPM Sheave Size No Load RPM Sheave Size 14" 3,000 3.65" 3,000 3.65" 4-5/8" 20" 2,475 4.12" 2,800 3.65" 7-5/8" 26" 1,900 4.12" 2,500 3.12" 10-5/8" 30" 1,650 4.75" 2,500 3.12" 11-3/4" 36" 1,400 4.75" 2,150 3.
EQUIPMENT AND PARTS WARRANTY Diamond Products warrants all equipment manufactured by it against defects in workmanship or materials for a period of one (1) year from the date of shipment to Customer.
